Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green 288-pin DDR5 RDIMM memory module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 2Rx8 CL40 1.1V ECC Registered RDIMM Supermicro H13SSF memory upgrade

SKU CH-D2AZ-MM92D

32 GB DDR5 4800 MHz RDIMM with ECC and registered buffering for Supermicro H13SSF servers

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB

Prikaži još 30 konfiguracija
  • Exact-fit 32 GB DDR5 4800 MHz CL40 for Supermicro H13SSF
  • Registered ECC RDIMM offloads controller and corrects single-bit errors
  • 2Rx8 rank and 1.10 V match the board's memory controller spec
  • 288-pin RDIMM form factor required by H13SSF motherboard
  • Verified compatibility with Supermicro H13SSF memory population rules

32GB DDR5-4800 ECC RDIMM

This NEMIX RAM module delivers 32GB of DDR5-4800 memory in a 288-pin Registered DIMM format. It operates at 1.10V with CL40 latency and features 2Rx8 organisation with on-die ECC for data integrity. The part is built for the Supermicro H13SSF motherboard where registered memory is required.

Suits populated Supermicro H13SSF builds

The registered design and ECC function match the H13SSF memory controller, so every slot can be filled at the rated 4800 speed. Builders using unbuffered UDIMMs or non-ECC modules should look elsewhere because the board will not accept them.

288-pin Registered DDR5 form factor

The module uses the 288-pin RDIMM interface that the H13SSF requires. A UDIMM or SODIMM will not fit the socket, so this physical specification is the single detail that decides compatibility.

Istaknuto

  • Exact-fit 32 GB DDR5 4800 MHz CL40 for Supermicro H13SSF
  • Registered ECC RDIMM offloads controller and corrects single-bit errors
  • 2Rx8 rank and 1.10 V match the board's memory controller spec
  • 288-pin RDIMM form factor required by H13SSF motherboard
  • Verified compatibility with Supermicro H13SSF memory population rules

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How much power does each 32 GB DDR5 4800 CL40 1.10 V registered DIMM draw when the server runs continuously?

Each module operates at 1.10 V; total power depends on the Supermicro H13SSF memory controller and workload, so consult the board manual for per-slot figures.

What motherboard slot type must the H13SSF provide for this 288-pin RDIMM to be recognised at full 32 GB capacity?

The board needs a DDR5 288-pin RDIMM slot that supports registered ECC memory and the 2Rx8 rank configuration listed for this kit.

Will this CL40 4800 MT/s kit run at rated speed if I keep older DDR5 RDIMMs in other slots of the same H13SSF?

Mixing ranks, speeds or voltages can force the controller to down-clock all slots; populate every channel with identical 2Rx8 1.10 V CL40 modules to maintain 4800 MT/s operation.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.