Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 2Rx8 CL40 1.1V ECC Registered RDIMM Supermicro H13SSF memory upgrade

SKU CH-D2AZ-MM92D

32 GB DDR5 4800 MHz RDIMM with ECC and registered buffering for Supermicro H13SSF servers

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Exact-fit 32 GB DDR5 4800 MHz CL40 for Supermicro H13SSF
  • Registered ECC RDIMM offloads controller and corrects single-bit errors
  • 2Rx8 rank and 1.10 V match the board's memory controller spec
  • 288-pin RDIMM form factor required by H13SSF motherboard
  • Verified compatibility with Supermicro H13SSF memory population rules

32GB DDR5-4800 ECC RDIMM

This NEMIX RAM module delivers 32GB of DDR5-4800 memory in a 288-pin Registered DIMM format. It operates at 1.10V with CL40 latency and features 2Rx8 organisation with on-die ECC for data integrity. The part is built for the Supermicro H13SSF motherboard where registered memory is required.

Suits populated Supermicro H13SSF builds

The registered design and ECC function match the H13SSF memory controller, so every slot can be filled at the rated 4800 speed. Builders using unbuffered UDIMMs or non-ECC modules should look elsewhere because the board will not accept them.

288-pin Registered DDR5 form factor

The module uses the 288-pin RDIMM interface that the H13SSF requires. A UDIMM or SODIMM will not fit the socket, so this physical specification is the single detail that decides compatibility.

Kohokohdat

  • Exact-fit 32 GB DDR5 4800 MHz CL40 for Supermicro H13SSF
  • Registered ECC RDIMM offloads controller and corrects single-bit errors
  • 2Rx8 rank and 1.10 V match the board's memory controller spec
  • 288-pin RDIMM form factor required by H13SSF motherboard
  • Verified compatibility with Supermicro H13SSF memory population rules

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much power does each 32 GB DDR5 4800 CL40 1.10 V registered DIMM draw when the server runs continuously?

Each module operates at 1.10 V; total power depends on the Supermicro H13SSF memory controller and workload, so consult the board manual for per-slot figures.

What motherboard slot type must the H13SSF provide for this 288-pin RDIMM to be recognised at full 32 GB capacity?

The board needs a DDR5 288-pin RDIMM slot that supports registered ECC memory and the 2Rx8 rank configuration listed for this kit.

Will this CL40 4800 MT/s kit run at rated speed if I keep older DDR5 RDIMMs in other slots of the same H13SSF?

Mixing ranks, speeds or voltages can force the controller to down-clock all slots; populate every channel with identical 2Rx8 1.10 V CL40 modules to maintain 4800 MT/s operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.