Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 4800 768GB 16x48GB CL40 2Rx8 1.1V ECC RDIMM Supermicro H14DSG-O-CPU memory upgrade

SKU CH-Z304-QRAE1

A 768GB DDR5-4800 ECC RDIMM kit of 16 modules at 48GB each, CL40 1.1V 2Rx8 registered memory validated for the Supermicro H14DSG-O-CPU motherboard

  • Capacity768GB (16 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 768GB 16X48GB

Näytä 30 muuta kokoonpanoa
  • Massive 768GB capacity with 16 × 48GB modules for dense server workloads
  • DDR5 4800 speed at CL40 latency for high-throughput enterprise applications
  • Registered ECC RDIMM design prevents silent data corruption under full load
  • 10V operation reduces power draw across all 16 populated slots
  • Exact-match kit validated for Supermicro H14DSG-O-CPU motherboard compatibility

768GB DDR5-4800 ECC RDIMM kit

This 768GB kit contains sixteen 48GB DDR5-4800 Registered ECC RDIMMs built for the Supermicro H14DSG-O-CPU motherboard. Each module runs at 1.10V with CL40 latency and a 2Rx8 organisation. The registered design lets the memory controller address every slot at full population without signal degradation.

Replaces partial or mixed-capacity DDR5 sets

Upgrading from a partially filled chassis or a slower DDR5 configuration is worthwhile when the workload demands the full 768GB at the board's native 4800 MT/s. The kit matches the exact rank, voltage and timing the platform expects, so all slots initialise at rated speed without manual tuning.

Sustained enterprise workloads

Registered buffering and on-die ECC keep data integrity intact during continuous, multi-threaded server tasks. The 1.10V operating point maintains thermal stability across all sixteen modules when the system runs fully populated for extended periods.

Kohokohdat

  • Massive 768GB capacity with 16 × 48GB modules for dense server workloads
  • DDR5 4800 speed at CL40 latency for high-throughput enterprise applications
  • Registered ECC RDIMM design prevents silent data corruption under full load
  • 10V operation reduces power draw across all 16 populated slots
  • Exact-match kit validated for Supermicro H14DSG-O-CPU motherboard compatibility

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K16
Capacity768GB (16 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 16X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will these 288-pin DDR5 RDIMMs fit the DIMM slots on my Supermicro H14DSG-O-CPU motherboard?

Yes, the kit uses the 288-pin DDR5 RDIMM form factor that the H14DSG-O-CPU requires, so every module seats directly in the board's DDR5 DIMM slots.

What is the correct population order when installing all 16 modules on the H14DSG-O-CPU?

Follow the motherboard manual's DIMM population sequence for a full 16-DIMM configuration; the kit's 2Rx8 registered ECC modules must be placed in the exact slots the manual specifies to initialise at DDR5-4800 CL40.

Do these registered ECC RDIMMs need any firmware updates or periodic reconfiguration during their service life?

No firmware updates or reconfiguration are required; the modules operate at 1.1V with on-die ECC and registered buffering for the duration of their installed life.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.