Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR5 RDIMM modules in a row, bare circuit boards with gold edge connectors and black memory chips

NEMIX RAM

NEMIX RAM 384GB 8x48GB DDR5 4800 CL40 2Rx8 RDIMM Supermicro H13DSG-OM memory upgrade

SKU CH-K64R-EKM05

384 GB server memory kit with eight 48 GB DDR5-4800 CL40 2Rx8 registered ECC RDIMMs at 1.1 V, validated for the Supermicro H13DSG-OM motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 8X48GB

Näytä 30 muuta kokoonpanoa
  • 384 GB total capacity from eight 48 GB modules for maximum memory density
  • DDR5 4800 speed with CL40 latency matches the server controller specification
  • 2Rx8 registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation meets the board's voltage requirement for stable full-population use
  • 288-pin RDIMM form factor verified for the Supermicro H13DSG-OM motherboard

Server-grade DDR5 ECC RDIMM kit

This 384GB kit contains eight 48GB DDR5-4800 Registered ECC modules built to the 288-pin RDIMM form factor. It targets administrators expanding Supermicro H13DSG-OM servers that require registered memory with error correction for production workloads.

Replaces partial or slower memory configurations

The kit fills all eight slots with matched 2Rx8 modules at 1.1V and CL40, letting the memory controller run the full population at rated PC5-38400 speed. The jump is worth it when the board's population rules demand identical rank, voltage and timing across every slot to avoid down-clocking or capacity limits.

Installs like standard RDIMMs but demands manual

Modules seat in the 288-pin DDR5 slots without tools, yet the motherboard manual must be consulted for approved population order and maximum supported capacity per CPU. The common mistake is mixing ranks or skipping the prescribed slot sequence, which prevents the system from recognising the full 384GB.

Kohokohdat

  • 384 GB total capacity from eight 48 GB modules for maximum memory density
  • DDR5 4800 speed with CL40 latency matches the server controller specification
  • 2Rx8 registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation meets the board's voltage requirement for stable full-population use
  • 288-pin RDIMM form factor verified for the Supermicro H13DSG-OM motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will these 288-pin DDR5 RDIMMs fit the Supermicro H13DSG-OM motherboard slots?

Yes, the kit is built as an exact-match upgrade for the Supermicro H13DSG-OM. The 288-pin Registered DIMM form factor is the one that board requires, not a UDIMM or SODIMM.

What is the correct order to populate the eight 48 GB modules on the H13DSG-OM?

Follow the motherboard manual for supported capacities and approved DIMM population order; the kit is spec-matched to those rules so every slot runs fully populated at rated speed.

Do the modules have a heat spreader that could block adjacent DIMM slots?

No, the RDIMMs ship without a heat spreader, so they sit low in the 288-pin sockets and will not interfere with neighbouring slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.