Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Eight bare green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 512GB (8x64GB) DDR5 4800 CL40 ECC RDIMM for HP Z8 G5 Fury G5 memory upgrade

SKU CH-YJGA-S3K3G

Eight 64 GB DDR5 4800 ECC registered DIMMs deliver 512 GB at CL40 and 1.1 V for HP Z8 G5 and Fury G5 workstations

  • Capacity512GB (8 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 512 GB total capacity across eight 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design with CL40 latency for data integrity
  • 1 V operating voltage reduces power draw
  • 288-pin RDIMM form factor built for HP Z8 G5 and Fury G5

512GB DDR5 ECC RDIMM Kit for HP Z8 G5

This NEMIX RAM kit delivers 512GB of DDR5 memory across eight 64GB registered DIMMs. It operates at 4800MHz with CL40 latency and 1.1V voltage. The modules feature ECC error correction and 2Rx4 organisation for server-grade data integrity. It is built for HP Z8 G5 and Z8 Fury G5 workstation platforms.

For IT teams scaling memory on validated HP

Professionals expanding Z8 G5 or Z8 Fury G5 systems to maximum supported capacity will find this matched 8-module kit suitable. Buyers needing unbuffered UDIMMs, non-ECC memory or lower-density modules for consumer motherboards should look elsewhere. Systems requiring speeds above 4800MHz or different voltage specifications are not addressed by this kit.

Registered ECC with 2Rx4 architecture ensures data

The RDIMM registered design places a buffer between the memory controller and DRAM chips, reducing electrical load on the workstation memory bus. Combined with ECC and 2Rx4 rank configuration, this specification detects and corrects single-bit errors while maintaining signal stability across all eight populated slots. This combination is the deciding factor for mission-critical workloads on compatible HP platforms.

Istaknuto

  • 512 GB total capacity across eight 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design with CL40 latency for data integrity
  • 1 V operating voltage reduces power draw
  • 288-pin RDIMM form factor built for HP Z8 G5 and Fury G5

Specifikacije

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K8
Capacity512GB (8 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHPE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content512GB (8X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Pitanja o ovom artiklu

How do I install the 288-pin DDR5 RDIMM modules in the HP Z8 G5 Fury G5, and what step is commonly missed?

Power off the workstation, open the chassis, align each 288-pin module with the keyed slot, press firmly until the latches click, then verify in BIOS that all eight 64 GB modules run at 4800 MT/s; the step often missed is seating every module fully so the retention clips engage on both sides.

What maintenance or replacement will the 512 GB ECC RDIMM kit need over its service life?

No routine maintenance is required; the modules have no heat spreaders or moving parts, so only a failed stick would need replacement, which is covered by the manufacturer's lifetime replacement warranty.

What limit appears first when the 8 x 64 GB kit runs sustained workloads at 1.1 V?

The CAS latency of CL40 at 4800 MT/s sets the timing floor; under continuous load the memory controller will hit this latency ceiling before voltage or thermal limits become a factor.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.