BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.0027765BTC
มีสินค้า
NEMIX RAM
NEMIX RAM 512GB (8x64GB) DDR5 4800 CL40 ECC RDIMM for HP Z8 G5 Fury G5 memory upgrade
Eight 64 GB DDR5 4800 ECC registered DIMMs deliver 512 GB at CL40 and 1.1 V for HP Z8 G5 and Fury G5 workstations
- Capacity512GB (8 x 64GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 512 GB total capacity across eight 64 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered design with CL40 latency for data integrity
- 1 V operating voltage reduces power draw
- 288-pin RDIMM form factor built for HP Z8 G5 and Fury G5
512GB DDR5 ECC RDIMM Kit for HP Z8 G5
This NEMIX RAM kit delivers 512GB of DDR5 memory across eight 64GB registered DIMMs. It operates at 4800MHz with CL40 latency and 1.1V voltage. The modules feature ECC error correction and 2Rx4 organisation for server-grade data integrity. It is built for HP Z8 G5 and Z8 Fury G5 workstation platforms.
For IT teams scaling memory on validated HP
Professionals expanding Z8 G5 or Z8 Fury G5 systems to maximum supported capacity will find this matched 8-module kit suitable. Buyers needing unbuffered UDIMMs, non-ECC memory or lower-density modules for consumer motherboards should look elsewhere. Systems requiring speeds above 4800MHz or different voltage specifications are not addressed by this kit.
Registered ECC with 2Rx4 architecture ensures data
The RDIMM registered design places a buffer between the memory controller and DRAM chips, reducing electrical load on the workstation memory bus. Combined with ECC and 2Rx4 rank configuration, this specification detects and corrects single-bit errors while maintaining signal stability across all eight populated slots. This combination is the deciding factor for mission-critical workloads on compatible HP platforms.
จุดเด่น
- 512 GB total capacity across eight 64 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered design with CL40 latency for data integrity
- 1 V operating voltage reduces power draw
- 288-pin RDIMM form factor built for HP Z8 G5 and Fury G5
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K8 |
| Capacity | 512GB (8 x 64GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | HPE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 512GB (8X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
คำถามเกี่ยวกับสินค้านี้
How do I install the 288-pin DDR5 RDIMM modules in the HP Z8 G5 Fury G5, and what step is commonly missed?
Power off the workstation, open the chassis, align each 288-pin module with the keyed slot, press firmly until the latches click, then verify in BIOS that all eight 64 GB modules run at 4800 MT/s; the step often missed is seating every module fully so the retention clips engage on both sides.
What maintenance or replacement will the 512 GB ECC RDIMM kit need over its service life?
No routine maintenance is required; the modules have no heat spreaders or moving parts, so only a failed stick would need replacement, which is covered by the manufacturer's lifetime replacement warranty.
What limit appears first when the 8 x 64 GB kit runs sustained workloads at 1.1 V?
The CAS latency of CL40 at 4800 MT/s sets the timing floor; under continuous load the memory controller will hit this latency ceiling before voltage or thermal limits become a factor.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
