BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278929BTC
Na zalihi
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR4 2933 CL21 2Rx8 1.2V 288-pin UDIMM memory upgrade
64 GB kit of two 32 GB DDR4 2933 CL21 unbuffered UDIMMs for Supermicro systems
- Capacity64GB (2 x 32GB)
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64 GB kit doubles system memory capacity using two 32 GB modules
- DDR4 2933 MHz speed matches PC4-23400 bandwidth for responsive workloads
- 20 V operation reduces power draw and heat in compatible Supermicro platforms
- CL21 CAS latency at 2Rx8 rank keeps timing stable under sustained load
- 288-pin UDIMM form factor fits standard desktop and workstation DIMM slots
SuperMicro Compatible DDR4 Kit
This 64 GB kit contains two 32 GB unbuffered UDIMM modules built for SuperMicro desktop and workstation motherboards. It targets system builders and IT professionals who need validated memory for compatible platforms. The non-ECC design suits standard workstation workloads rather than mission-critical server deployments. Installation follows the standard 288-pin DDR4 process described in the motherboard manual.
DDR4 2933 CL21 Specification
The modules run at DDR4 2933 (PC4-23400) with a CAS latency of CL21 at 1.20 V. This speed and timing combination is the single specification that determines whether the kit matches the motherboard's qualified-vendor list. Builders must verify that their specific SuperMicro board supports DDR4 2933 non-ECC unbuffered memory before purchase. The 2Rx8 rank organisation is fixed by the module design.
64 GB Capacity and Headroom
The 64 GB total capacity handles large datasets, virtual machines and multi-application workflows on supported SuperMicro workstations. Dual-channel population with two modules leaves remaining slots open for future expansion if the board provides more than two DIMM slots. Systems requiring ECC error correction or registered memory will not be compatible with this non-ECC unbuffered kit.
Istaknuto
- 64 GB kit doubles system memory capacity using two 32 GB modules
- DDR4 2933 MHz speed matches PC4-23400 bandwidth for responsive workloads
- 20 V operation reduces power draw and heat in compatible Supermicro platforms
- CL21 CAS latency at 2Rx8 rank keeps timing stable under sustained load
- 288-pin UDIMM form factor fits standard desktop and workstation DIMM slots
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT |
Pitanja o ovom artiklu
What does 2933 MT/s mean once the kit is installed in a Supermicro workstation?
The modules run at 2933 MT/s, delivering PC4-23400 bandwidth so the CPU sees the full rated throughput without manual tuning.
How does the DDR4 288-pin UDIMM interface limit performance in practice?
The unbuffered DDR4 UDIMM slot caps transfer rate at 2933 MT/s and does not support ECC, so data integrity relies on the CPU alone.
What physical clearance does the 288-pin UDIMM need on the Supermicro C9X299-PGF board?
Each 32 GB stick is a standard-height 288-pin UDIMM with no heat spreader, so it fits the regular DIMM slots without extra clearance.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00281524BTC
Na zalihi
