暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 UDIMM modules, no heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 2933 CL21 2Rx8 1.2V 288-pin UDIMM memory upgrade

SKU CH-RY62-1F4CF

64 GB kit of two 32 GB DDR4 2933 CL21 unbuffered UDIMMs for Supermicro systems

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB kit doubles system memory capacity using two 32 GB modules
  • DDR4 2933 MHz speed matches PC4-23400 bandwidth for responsive workloads
  • 20 V operation reduces power draw and heat in compatible Supermicro platforms
  • CL21 CAS latency at 2Rx8 rank keeps timing stable under sustained load
  • 288-pin UDIMM form factor fits standard desktop and workstation DIMM slots

SuperMicro Compatible DDR4 Kit

This 64 GB kit contains two 32 GB unbuffered UDIMM modules built for SuperMicro desktop and workstation motherboards. It targets system builders and IT professionals who need validated memory for compatible platforms. The non-ECC design suits standard workstation workloads rather than mission-critical server deployments. Installation follows the standard 288-pin DDR4 process described in the motherboard manual.

DDR4 2933 CL21 Specification

The modules run at DDR4 2933 (PC4-23400) with a CAS latency of CL21 at 1.20 V. This speed and timing combination is the single specification that determines whether the kit matches the motherboard's qualified-vendor list. Builders must verify that their specific SuperMicro board supports DDR4 2933 non-ECC unbuffered memory before purchase. The 2Rx8 rank organisation is fixed by the module design.

64 GB Capacity and Headroom

The 64 GB total capacity handles large datasets, virtual machines and multi-application workflows on supported SuperMicro workstations. Dual-channel population with two modules leaves remaining slots open for future expansion if the board provides more than two DIMM slots. Systems requiring ECC error correction or registered memory will not be compatible with this non-ECC unbuffered kit.

特長

  • 64 GB kit doubles system memory capacity using two 32 GB modules
  • DDR4 2933 MHz speed matches PC4-23400 bandwidth for responsive workloads
  • 20 V operation reduces power draw and heat in compatible Supermicro platforms
  • CL21 CAS latency at 2Rx8 rank keeps timing stable under sustained load
  • 288-pin UDIMM form factor fits standard desktop and workstation DIMM slots

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-328K2
Capacity64GB (2 x 32GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

この商品に関する質問

What does 2933 MT/s mean once the kit is installed in a Supermicro workstation?

The modules run at 2933 MT/s, delivering PC4-23400 bandwidth so the CPU sees the full rated throughput without manual tuning.

How does the DDR4 288-pin UDIMM interface limit performance in practice?

The unbuffered DDR4 UDIMM slot caps transfer rate at 2933 MT/s and does not support ECC, so data integrity relies on the CPU alone.

What physical clearance does the 288-pin UDIMM need on the Supermicro C9X299-PGF board?

Each 32 GB stick is a standard-height 288-pin UDIMM with no heat spreader, so it fits the regular DIMM slots without extra clearance.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。