Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green rectangular DDR3 SODIMM module with gold edge connector and black memory chips

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX KS-7417Z memory upgrade

SKU CH-3F5V-03AXQ

8GB DDR3 1333 SODIMM module for POSIFLEX KS-7417Z point-of-sale terminals

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity boosts POS terminal multitasking
  • DDR3 1333 speed matches POSIFLEX KS-7417Z requirements
  • 35V low voltage reduces power consumption
  • 204-pin SODIMM fits directly into terminal slot
  • Non-ECC unbuffered design ensures stable operation

8 GB DDR3 SODIMM for POSIFLEX KS-7417Z

This 204-pin DDR3 module delivers 8 GB at 1333 MHz for the POSIFLEX KS-7417Z fanless POS terminal. It uses a 2Rx8 unbuffered layout and runs at 1.35 V. The part number is MS10600-828K1. It is built with major OEM chips from Samsung, Micron or Hynix.

Low-voltage operation for fanless thermals

The 1.35 V rating keeps power draw and heat low, which suits the fanless chassis of the target terminal. No heat spreader is fitted, so the module relies on the system airflow design. CL9 latency at PC3-10600 speed provides stable timing for continuous point-of-sale workloads.

Replaces lower-capacity DDR3 SODIMMs in the KS-7417Z

Upgrading from a 2 GB or 4 GB stick to this 8 GB module adds headroom for multi-tasking POS software. The jump is worth it when the terminal runs several peripherals or a local database. It will not fit systems that require DDR5, ECC, registered DIMMs or a different pin count.

Istaknuto

  • 8GB capacity boosts POS terminal multitasking
  • DDR3 1333 speed matches POSIFLEX KS-7417Z requirements
  • 35V low voltage reduces power consumption
  • 204-pin SODIMM fits directly into terminal slot
  • Non-ECC unbuffered design ensures stable operation

Specifikacije

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Pitanja o ovom artiklu

How do I install this 204-pin SODIMM in the POSIFLEX KS-7417Z and what step is often missed?

Power off the terminal, open the memory compartment, align the notch on the 204-pin SODIMM with the slot key, press firmly until the side clips click, then verify 8GB appears in BIOS before closing the case.

What maintenance or replacement will this DDR3 module need over time?

No scheduled maintenance is required; the module has no heat spreader and runs at 1.35V, so replacement is only necessary if a memory test reports errors or the terminal fails to POST.

What limit appears first when this 1333 MHz CL9 memory runs sustained workloads on the KS-7417Z?

The DDR3 1333 MT/s bandwidth and CL9 latency ceiling will bottleneck throughput before the 1.50 V JEDEC voltage limit or thermal constraints become a factor.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.