Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two green DDR5 RDIMM modules without heat spreaders, 128GB kit

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 128GB (2x64GB) CL46 1.1V 2Rx4 Supermicro H13SSF memory upgrade

SKU CH-XXJK-AMW7S

128 GB dual-rank DDR5 RDIMM kit runs at 5600 MHz with ECC and registered buffering for Supermicro H13SSF servers

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 128GB total capacity for large workloads with 2 x 64GB modules
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1V operation at CL46 latency matches server memory controller specs
  • Verified fit for Supermicro H13SSF motherboard with 288-pin RDIMM form factor

Exact-match DDR5 ECC kit for Supermicro H13SSF

This 128GB kit uses two 64GB DDR5 5600 RDIMMs built to the Supermicro H13SSF memory-population rules. Registered ECC architecture offloads the controller so every slot runs fully populated at rated speed. The kit is supplied new and ready for server deployment.

288-pin RDIMM form factor with no heat spreader

Registered buffering and ECC correction keep data integrity intact across all populated channels. The 1.10V operating voltage matches the board specification, and the 2Rx4 rank layout fits the approved population order. Modules slot directly into the 288-pin DDR5 sockets without adapters.

Replaces partial or slower memory configurations

Upgrading from smaller-capacity or lower-speed DIMMs unlocks the full 128GB capacity the platform supports. The jump is worth it when workloads demand maximum registered ECC capacity at DDR5 5600 without mixing ranks or voltages. Buyers who need a different capacity, a UDIMM form factor, or non-ECC memory should look elsewhere.

Istaknuto

  • 128GB total capacity for large workloads with 2 x 64GB modules
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1V operation at CL46 latency matches server memory controller specs
  • Verified fit for Supermicro H13SSF motherboard with 288-pin RDIMM form factor

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Pitanja o ovom artiklu

Does the DDR5 5600 PC5-44800 interface cap the memory speed at 5600 MT/s in this Supermicro H13SSF kit?

Yes, the modules are rated DDR5 5600 (PC5-44800) and will run at that speed when the board's memory controller supports it.

What physical slot and form factor do these 288-pin RDIMMs need on the H13SSF motherboard?

They require standard 288-pin DDR5 RDIMM slots; the board must accept registered DIMMs, not UDIMM or SODIMM.

What is the correct population order for the 2x64 GB 2Rx4 kit, and which step do installers often miss?

Follow the H13SSF manual's DIMM population sequence for 2Rx4 registered modules and ensure each DIMM clicks fully into the slot.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.