NEMIX RAM
NEMIX RAM DDR5 5600 ECC RDIMM 128GB (2x64GB) CL46 1.1V 2Rx4 Supermicro H13SSF memory upgrade
128 GB dual-rank DDR5 RDIMM kit runs at 5600 MHz with ECC and registered buffering for Supermicro H13SSF servers
- Capacity128GB (2 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 128GB total capacity for large workloads with 2 x 64GB modules
- DDR5 5600 speed rated at PC5-44800 for high throughput
- Registered ECC design corrects single-bit errors on the fly
- 1V operation at CL46 latency matches server memory controller specs
- Verified fit for Supermicro H13SSF motherboard with 288-pin RDIMM form factor
Exact-match DDR5 ECC kit for Supermicro H13SSF
This 128GB kit uses two 64GB DDR5 5600 RDIMMs built to the Supermicro H13SSF memory-population rules. Registered ECC architecture offloads the controller so every slot runs fully populated at rated speed. The kit is supplied new and ready for server deployment.
288-pin RDIMM form factor with no heat spreader
Registered buffering and ECC correction keep data integrity intact across all populated channels. The 1.10V operating voltage matches the board specification, and the 2Rx4 rank layout fits the approved population order. Modules slot directly into the 288-pin DDR5 sockets without adapters.
Replaces partial or slower memory configurations
Upgrading from smaller-capacity or lower-speed DIMMs unlocks the full 128GB capacity the platform supports. The jump is worth it when workloads demand maximum registered ECC capacity at DDR5 5600 without mixing ranks or voltages. Buyers who need a different capacity, a UDIMM form factor, or non-ECC memory should look elsewhere.
จุดเด่น
- 128GB total capacity for large workloads with 2 x 64GB modules
- DDR5 5600 speed rated at PC5-44800 for high throughput
- Registered ECC design corrects single-bit errors on the fly
- 1V operation at CL46 latency matches server memory controller specs
- Verified fit for Supermicro H13SSF motherboard with 288-pin RDIMM form factor
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
Does the DDR5 5600 PC5-44800 interface cap the memory speed at 5600 MT/s in this Supermicro H13SSF kit?
Yes, the modules are rated DDR5 5600 (PC5-44800) and will run at that speed when the board's memory controller supports it.
What physical slot and form factor do these 288-pin RDIMMs need on the H13SSF motherboard?
They require standard 288-pin DDR5 RDIMM slots; the board must accept registered DIMMs, not UDIMM or SODIMM.
What is the correct population order for the 2x64 GB 2Rx4 kit, and which step do installers often miss?
Follow the H13SSF manual's DIMM population sequence for 2Rx4 registered modules and ensure each DIMM clicks fully into the slot.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



