Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black mid-tower with tinted tempered glass side panels, vertical orientation

NZXT

NZXT CM-H92FB-P1 Black PC case

SKU CH-JF25-PX014 MPN CM-H92FB-P1

A tinted tempered glass mid-tower supporting ATX, E-ATX, Micro-ATX and Mini-ITX boards with seven 140 mm and 120 mm fans pre-installed

  • ColorBlack
  • Case Materialtinted tempered glass
  • Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
  • Side Panel2 x Sides Tempered Glass Panel
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays6

Model H9 Flow RGB+ (2025)

  • Tinted tempered glass panels showcase internal components
  • Supports ATX, E-ATX, Micro ATX and Mini ITX motherboards
  • Seven expansion slots provide room for multiple add-in cards
  • Pre-installed 140 mm and 120 mm fans deliver airflow out of the box
  • GPU clearance up to 459 mm fits long graphics cards

Mid-tower case with tempered glass

The NZXT CM-H92FB-P1 is a black mid-tower chassis built from tinted tempered glass on two sides. It supports ATX, E-ATX, Micro-ATX and Mini-ITX motherboards and includes seven expansion slots for add-in cards. The case comes with seven pre-installed fans: three 140 mm units at the bottom, three 140 mm units on the side and one 120 mm unit at the rear.

Upgrade from smaller chassis

Builders moving from a compact case gain room for graphics cards up to 459 mm long when using fans under 56 mm thick at the front-right, or 410 mm with a 420 mm radiator and 56 mm fans installed there. The 165 mm CPU cooler clearance and 200 mm power supply limit also exceed many entry-level enclosures, making the jump worthwhile for high-end air or liquid cooling.

Limits of the ATX form factor

The ATX layout caps internal 3.5-inch drive bays at two and 2.5-inch bays at six, restricting bulk storage expansion. Seven expansion slots bound the number of full-height cards, while the 19.9 by 12.4 by 18.9 inch footprint demands adequate desk or floor space. Fan mounts top out at three 120 mm or three 140 mm positions on the top and bottom, defining the maximum airflow configuration.

Istaknuto

  • Tinted tempered glass panels showcase internal components
  • Supports ATX, E-ATX, Micro ATX and Mini ITX motherboards
  • Seven expansion slots provide room for multiple add-in cards
  • Pre-installed 140 mm and 120 mm fans deliver airflow out of the box
  • GPU clearance up to 459 mm fits long graphics cards

Specifikacije

BrandNZXT
ModelCM-H92FB-P1
ColorBlack
Case Materialtinted tempered glass
Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
Side Panel2 x Sides Tempered Glass Panel
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays6
Expansion Slots7
Fan OptionsBottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm / Top - 3 x 140mm
Pre-installed FansBottom - 3 x 140mm / Rear - 1 x 120mm / Side - 3 x 140mm
Max GPU Length"Up to 459 mm (with <56 mm thickness fans installed at the front-right)
Up to 410 mm (with 56 mm thick 420 mm AIO and fans installed at the front-right)"
Max CPU Cooler Height165 mm
Max PSU Length200 mm
Dimensions19.9" x 12.4" x 18.9"
Težina pošiljke16.24 kg
Dimenzije pakiranja584 × 572 × 394 mm

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What clearance does the 19.9" x 12.4" x 18.9" case need for the side tempered glass panels?

The tinted tempered glass panels sit flush on each side, so allow at least a few millimetres of lateral space for panel removal and cable routing behind the motherboard tray.

Which step is most often missed when installing the pre-installed 140 mm bottom, side and 120 mm rear fans?

Builders frequently forget to connect the three side 140 mm fans to the motherboard or controller after mounting the motherboard, leaving them unpowered.

When should the dust filters behind the bottom three 140 mm fans be cleaned or replaced?

Inspect the bottom filters every three to six months; heavy dust buildup restricts airflow to the GPU and reduces cooling performance.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.