Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two green DDR3 ECC registered RDIMM sticks 240-pin 16GB kit

OWC

OWC 16GB 2x8GB DDR3 1333 ECC Registered RDIMM Dell PowerEdge R920 T410 T610 T710

SKU CH-2376-Q8TFY

16 GB DDR3 1333 ECC registered RDIMM kit for Dell PowerEdge R920, T410, T610 and T710 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16 GB DDR3 1333 ECC registered kit boosts server capacity
  • CL9 1.5 V 2Rx4 modules deliver stable error-correcting performance
  • 240-pin RDIMM form factor fits Dell PowerEdge R920 T410 T610 T710
  • Two matched 8 GB sticks enable dual-channel throughput
  • Replaces Dell part numbers A2984886 A2984887 A3198153 A3721483 A3858996 A4051416 A4051431 A4105734 A4188260 A4188265 A4188276 A6199968

System-Specific DDR3 ECC RDIMM Kit

This 16 GB kit contains two 8 GB registered DDR3 modules built for Dell PowerEdge servers. It targets administrators upgrading R920, T410, T610 or T710 platforms that require ECC registered memory. Standard desktop boards cannot use these modules because they expect unbuffered DIMMs.

Registered ECC With 2Rx4 Organisation

The single decisive attribute is the registered ECC design with a 2Rx4 rank layout. Only systems that explicitly support registered error-correcting modules will POST with this kit; mixing it with unbuffered memory will prevent boot.

Dual-Module Capacity For Multi-Socket Headroom

Two 8 GB sticks populate two slots and leave remaining DIMM sockets free for further expansion on supported chassis. The kit reaches its practical limit when all registered channels are filled or when the platform’s maximum registered capacity is reached.

Istaknuto

  • 16 GB DDR3 1333 ECC registered kit boosts server capacity
  • CL9 1.5 V 2Rx4 modules deliver stable error-correcting performance
  • 240-pin RDIMM form factor fits Dell PowerEdge R920 T410 T610 T710
  • Two matched 8 GB sticks enable dual-channel throughput
  • Replaces Dell part numbers A2984886 A2984887 A3198153 A3721483 A3858996 A4051416 A4051431 A4105734 A4188260 A4188265 A4188276 A6199968

Specifikacije

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge R920
Dell PowerEdge T410
Dell PowerEdge T610
Dell PowerEdge T710

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What does the 1333 MHz rating mean once the modules are installed in a PowerEdge server?

The modules run at 1333 MHz DDR3 speed with CL9 latency, delivering the standard PC3-10600 data rate for registered ECC memory in these systems.

How does the PC3-10600 designation limit performance in practice?

PC3-10600 sets the maximum JEDEC transfer rate for DDR3 1333; the registered buffer and ECC add a small latency overhead but maintain data integrity in server workloads.

What physical slot and form factor do these 240-pin RDIMMs need to fit in a T410, T610, T710 or R920?

They require a standard 240-pin DDR3 DIMM socket and the registered RDIMM form factor; no heat spreader is fitted, so they clear normal server memory cages.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.