OWC 8GB (2x4GB) DDR3L 1600 CL11 1.35V ECC UDIMM desktop RAM
- 8GB (2 x 4GB)
- DDR3L 1600 (PC3L 12…
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
OWC
A 16 GB dual-channel DDR3 1866 kit with ECC unbuffered DIMMs for workstations, servers and NAS systems
Capacity 16GB (2 x 8GB)
This OWC kit provides 16 GB of DDR3 1866 memory in a matched pair of 8 GB modules. ECC unbuffered operation suits workstations, servers and NAS units that require error correction without registered signalling. Each DIMM runs at 1.5 V with CL13 timing on a standard 240-pin interface.
Replacing non-ECC modules with this kit adds single-bit error correction for data integrity in critical workloads. The jump is worthwhile when the platform supports ECC unbuffered DDR3 and the application benefits from 16 GB in dual-channel configuration. JEDEC compliance ensures the modules meet the original equipment specifications.
Installation follows the usual desktop DIMM procedure: power down, open the chassis, align the notch and press until the latches click. Common issues include mixing ECC with non-ECC modules, populating slots in the wrong order for dual-channel, or using a board that only accepts registered memory. Verify the manual before fitting.
| Brand | OWC |
|---|---|
| Part Number | 1E8D32R8016P |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
The kit uses standard 240-pin DDR3 UDIMM form factor, so it fits any desktop, workstation or server board that accepts unbuffered DDR3 DIMMs at 1.5 V.
Align the notch with the slot key, press straight down until both retention clips click, and install the pair in the same-colour slots for dual-channel operation — the common error is stopping before the clips fully engage.
ECC is active whenever the platform supports it; no driver or BIOS toggle is required, and the modules themselves have no wear items — only a motherboard or CPU memory-controller failure would ever require replacement.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?