OWC 8GB (2x4GB) DDR3L 1600 CL11 1.35V ECC UDIMM desktop RAM
- 8GB (2 x 4GB)
- DDR3L 1600 (PC3L 12…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
OWC
A 16 GB dual-channel DDR3 1866 kit with ECC unbuffered DIMMs for workstations, servers and NAS systems
Capacity 16GB (2 x 8GB)
This OWC kit provides 16 GB of DDR3 1866 memory in a matched pair of 8 GB modules. ECC unbuffered operation suits workstations, servers and NAS units that require error correction without registered signalling. Each DIMM runs at 1.5 V with CL13 timing on a standard 240-pin interface.
Replacing non-ECC modules with this kit adds single-bit error correction for data integrity in critical workloads. The jump is worthwhile when the platform supports ECC unbuffered DDR3 and the application benefits from 16 GB in dual-channel configuration. JEDEC compliance ensures the modules meet the original equipment specifications.
Installation follows the usual desktop DIMM procedure: power down, open the chassis, align the notch and press until the latches click. Common issues include mixing ECC with non-ECC modules, populating slots in the wrong order for dual-channel, or using a board that only accepts registered memory. Verify the manual before fitting.
| Brand | OWC |
|---|---|
| Part Number | 1E8D32R8016P |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The kit uses standard 240-pin DDR3 UDIMM form factor, so it fits any desktop, workstation or server board that accepts unbuffered DDR3 DIMMs at 1.5 V.
Align the notch with the slot key, press straight down until both retention clips click, and install the pair in the same-colour slots for dual-channel operation — the common error is stopping before the clips fully engage.
ECC is active whenever the platform supports it; no driver or BIOS toggle is required, and the modules themselves have no wear items — only a motherboard or CPU memory-controller failure would ever require replacement.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?