Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two green DDR3L ECC registered DIMMs in anti-static bag

OWC

OWC 16GB (2x8GB) DDR3L 1066 PC3L-8500 CL7 4Rx8 240-pin 1.35V ECC Registered RDIMM server RAM

SKU CH-7ASH-BT0WH

A 16 GB dual-channel DDR3L ECC registered RDIMM kit running at 1066 MHz with CL7 latency and 1.35 V operation

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1066 (PC3L 8500)
  • CAS LatencyCL7
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16 GB dual-channel kit expands memory capacity for workloads
  • DDR3L 1066 CL7 timing delivers responsive performance
  • Low 1.35 V operation reduces power draw and heat
  • JEDEC and RoHS compliant for warranty-safe upgrades

Server DDR3L ECC Registered Kit

This OWC kit provides 16GB of DDR3L memory across two 8GB modules. It runs at 1066MHz with a CAS latency of CL7 and operates at 1.35V. The modules use a 240-pin RDIMM form factor with a 4Rx8 rank configuration and include ECC error correction.

Workstation and Server Upgrades

The registered design and ECC support suit servers, workstations, NAS systems and routers that require buffered memory. Buyers who need unbuffered DIMMs for standard desktop motherboards cannot use this kit. It also cannot be mixed with existing unbuffered modules in the same system.

Registered ECC RDIMM Architecture

The single specification that decides compatibility is the registered ECC RDIMM design. Only platforms that explicitly support registered DDR3L ECC modules at 1.35V will accept this memory. Verify the motherboard or system documentation for registered DIMM support before purchase.

Istaknuto

  • ECC registered design protects data integrity in servers
  • 16 GB dual-channel kit expands memory capacity for workloads
  • DDR3L 1066 CL7 timing delivers responsive performance
  • Low 1.35 V operation reduces power draw and heat
  • JEDEC and RoHS compliant for warranty-safe upgrades

Specifikacije

BrandOWC
Part Number8R5T34R8016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1066 (PC3L 8500)
CAS LatencyCL7
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Does this kit require a motherboard with 240-pin DDR3L slots that support ECC registered memory?

Yes. These 240-pin DDR3L 1066 modules are ECC registered RDIMMs and will only work in workstations, servers or NAS systems that accept registered ECC memory.

Can I add these 1.35 V DDR3L 1066 modules alongside existing 1.5 V DDR3 registered DIMMs?

The kit runs at 1.35 V. Mixing voltages is not recommended; the system will typically default to the higher voltage, which may exceed the modules' rating.

How do I confirm the dual-channel kit is running at PC3L-8500 CL7 after installation?

Check the BIOS or a system-information tool; it should report 1066 MHz speed, CL7 latency and 16 GB total capacity across both slots.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.