Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3L ECC registered DIMMs in anti-static bag

OWC

OWC 16GB (2x8GB) DDR3L 1066 PC3L-8500 CL7 4Rx8 240-pin 1.35V ECC Registered RDIMM server RAM

SKU CH-7ASH-BT0WH

A 16 GB dual-channel DDR3L ECC registered RDIMM kit running at 1066 MHz with CL7 latency and 1.35 V operation

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1066 (PC3L 8500)
  • CAS LatencyCL7
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16 GB dual-channel kit expands memory capacity for workloads
  • DDR3L 1066 CL7 timing delivers responsive performance
  • Low 1.35 V operation reduces power draw and heat
  • JEDEC and RoHS compliant for warranty-safe upgrades

Server DDR3L ECC Registered Kit

This OWC kit provides 16GB of DDR3L memory across two 8GB modules. It runs at 1066MHz with a CAS latency of CL7 and operates at 1.35V. The modules use a 240-pin RDIMM form factor with a 4Rx8 rank configuration and include ECC error correction.

Workstation and Server Upgrades

The registered design and ECC support suit servers, workstations, NAS systems and routers that require buffered memory. Buyers who need unbuffered DIMMs for standard desktop motherboards cannot use this kit. It also cannot be mixed with existing unbuffered modules in the same system.

Registered ECC RDIMM Architecture

The single specification that decides compatibility is the registered ECC RDIMM design. Only platforms that explicitly support registered DDR3L ECC modules at 1.35V will accept this memory. Verify the motherboard or system documentation for registered DIMM support before purchase.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 16 GB dual-channel kit expands memory capacity for workloads
  • DDR3L 1066 CL7 timing delivers responsive performance
  • Low 1.35 V operation reduces power draw and heat
  • JEDEC and RoHS compliant for warranty-safe upgrades

Tekniset tiedot

BrandOWC
Part Number8R5T34R8016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1066 (PC3L 8500)
CAS LatencyCL7
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does this kit require a motherboard with 240-pin DDR3L slots that support ECC registered memory?

Yes. These 240-pin DDR3L 1066 modules are ECC registered RDIMMs and will only work in workstations, servers or NAS systems that accept registered ECC memory.

Can I add these 1.35 V DDR3L 1066 modules alongside existing 1.5 V DDR3 registered DIMMs?

The kit runs at 1.35 V. Mixing voltages is not recommended; the system will typically default to the higher voltage, which may exceed the modules' rating.

How do I confirm the dual-channel kit is running at PC3L-8500 CL7 after installation?

Check the BIOS or a system-information tool; it should report 1066 MHz speed, CL7 latency and 16 GB total capacity across both slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.