Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green bare circuit board with gold edge connector and black memory chips

OWC

OWC 16GB DDR4 2666 CL19 2Rx8 VLP 288-pin 1.2V ECC Unbuffered DIMM memory upgrade

SKU CH-09S1-Z2YPD

16 GB DDR4 2666 ECC VLP UDIMM for Supermicro SuperBlade 4119MG-X and select X11 boards

  • Capacity16GB
  • Type288-Pin DDR4 ECC VLP UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • 16 GB DDR4 2666 boosts multitasking speed
  • CL19 latency keeps data flowing smoothly
  • 2 V operation reduces power draw
  • 2Rx8 dual-rank design maximises density
  • Validated for Supermicro SuperBlade 4119MG-X

OWC 16GB DDR4 2666 ECC VLP DIMM

This OWC module delivers 16GB of DDR4 2666 memory in a single 288-pin VLP unbuffered DIMM. It runs at CL19 latency and 1.2V with ECC error correction and a 2Rx8 rank configuration. The part is validated for specific Supermicro SuperBlade and X11 series motherboards.

Suits Supermicro blade and rack builders needing ECC

IT teams expanding Supermicro SuperBlade 4119MG-X or X11SCE-F, X11SCL-LN4F, X11SCM-F, X11SCM-LN8F platforms will find this a direct fit. Builders requiring registered RDIMM modules, non-ECC memory, standard-height DIMMs, or capacities other than 16GB per slot should look elsewhere.

JEDEC DDR4 2666 CL19 1.2V 2Rx8 VLP spec

The module conforms to JEDEC PC4-21300 timings at 1.2 volts with 2Rx8 organisation in a very-low-profile form factor. This exact combination of speed, latency, voltage, rank, height and ECC type determines whether the motherboard will accept it.

Istaknuto

  • 16 GB DDR4 2666 boosts multitasking speed
  • CL19 latency keeps data flowing smoothly
  • 2 V operation reduces power draw
  • 2Rx8 dual-rank design maximises density
  • Validated for Supermicro SuperBlade 4119MG-X

Specifikacije

BrandOWC
Part Number2E6V42R816GB
Capacity16GB
Type288-Pin DDR4 ECC VLP UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 4119MG-X
Supermicro Motherboard X11SCE-F
Supermicro Motherboard X11SCL-LN4F
Supermicro Motherboard X11SCM-F
Supermicro Motherboard X11SCM-LN8F

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Should I choose a single 16GB module or add multiple 16GB DIMMs for my Supermicro SuperBlade 4119MG-X?

This listing is for a single 16GB DDR4 2666 CL19 2Rx8 VLP ECC Unbuffered DIMM. OWC recommends using identical capacity, speed and manufacturer modules for optimal performance, so adding matching 16GB sticks is the correct upgrade path.

What does the DDR4 2666 PC4-21300 speed rating deliver inside a Supermicro X11SCE-F system?

The module runs at 2666 MT/s with CL19 latency at 1.2V, providing the standard JEDEC bandwidth of PC4-21300. The motherboard will operate the DIMM at this rated speed without overclocking.

Is the 288-pin VLP ECC Unbuffered interface compatible with the Supermicro X11SCM-LN8F memory slots?

Yes. The 288-pin DDR4 VLP ECC Unbuffered form factor matches the UDIMM slots on the listed Supermicro motherboards, including the X11SCM-LN8F, and the 1.2V voltage is the standard DDR4 operating level.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.