Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green bare circuit board with gold edge connector and black memory chips

OWC

OWC 16GB DDR4 2666 CL19 2Rx8 VLP 288-pin 1.2V ECC Unbuffered DIMM memory upgrade

SKU CH-09S1-Z2YPD

16 GB DDR4 2666 ECC VLP UDIMM for Supermicro SuperBlade 4119MG-X and select X11 boards

  • Capacity16GB
  • Type288-Pin DDR4 ECC VLP UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • 16 GB DDR4 2666 boosts multitasking speed
  • CL19 latency keeps data flowing smoothly
  • 2 V operation reduces power draw
  • 2Rx8 dual-rank design maximises density
  • Validated for Supermicro SuperBlade 4119MG-X

OWC 16GB DDR4 2666 ECC VLP DIMM

This OWC module delivers 16GB of DDR4 2666 memory in a single 288-pin VLP unbuffered DIMM. It runs at CL19 latency and 1.2V with ECC error correction and a 2Rx8 rank configuration. The part is validated for specific Supermicro SuperBlade and X11 series motherboards.

Suits Supermicro blade and rack builders needing ECC

IT teams expanding Supermicro SuperBlade 4119MG-X or X11SCE-F, X11SCL-LN4F, X11SCM-F, X11SCM-LN8F platforms will find this a direct fit. Builders requiring registered RDIMM modules, non-ECC memory, standard-height DIMMs, or capacities other than 16GB per slot should look elsewhere.

JEDEC DDR4 2666 CL19 1.2V 2Rx8 VLP spec

The module conforms to JEDEC PC4-21300 timings at 1.2 volts with 2Rx8 organisation in a very-low-profile form factor. This exact combination of speed, latency, voltage, rank, height and ECC type determines whether the motherboard will accept it.

Helstu kostir

  • 16 GB DDR4 2666 boosts multitasking speed
  • CL19 latency keeps data flowing smoothly
  • 2 V operation reduces power draw
  • 2Rx8 dual-rank design maximises density
  • Validated for Supermicro SuperBlade 4119MG-X

Tæknilýsing

BrandOWC
Part Number2E6V42R816GB
Capacity16GB
Type288-Pin DDR4 ECC VLP UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 4119MG-X
Supermicro Motherboard X11SCE-F
Supermicro Motherboard X11SCL-LN4F
Supermicro Motherboard X11SCM-F
Supermicro Motherboard X11SCM-LN8F

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Should I choose a single 16GB module or add multiple 16GB DIMMs for my Supermicro SuperBlade 4119MG-X?

This listing is for a single 16GB DDR4 2666 CL19 2Rx8 VLP ECC Unbuffered DIMM. OWC recommends using identical capacity, speed and manufacturer modules for optimal performance, so adding matching 16GB sticks is the correct upgrade path.

What does the DDR4 2666 PC4-21300 speed rating deliver inside a Supermicro X11SCE-F system?

The module runs at 2666 MT/s with CL19 latency at 1.2V, providing the standard JEDEC bandwidth of PC4-21300. The motherboard will operate the DIMM at this rated speed without overclocking.

Is the 288-pin VLP ECC Unbuffered interface compatible with the Supermicro X11SCM-LN8F memory slots?

Yes. The 288-pin DDR4 VLP ECC Unbuffered form factor matches the UDIMM slots on the listed Supermicro motherboards, including the X11SCM-LN8F, and the 1.2V voltage is the standard DDR4 operating level.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.