Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Four green DDR4 RDIMM modules with gold contacts and black chips

OWC

OWC 256GB (4x64GB) DDR4 2933 ECC RDIMM memory upgrade

SKU CH-VPR9-JWEMT

256 GB kit of four 64 GB DDR4 2933 ECC registered DIMMs for HP ProLiant XL270d Gen10 servers

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 256GB (4 x 64GB)

  • 256 GB total capacity from four 64 GB modules
  • DDR4 2933 MHz CL21 at 1.2 V for efficient throughput
  • ECC registered design detects and corrects data errors
  • 288-pin RDIMM form factor fits HP ProLiant XL270d Gen10
  • Backward compatible with 2133, 2400 and 2666 MHz systems

256GB DDR4 ECC RDIMM kit for HP ProLiant XL270d

This 256GB kit contains four 64GB DDR4 2933 PC4-23400 CL21 registered ECC modules. It is built for the HP ProLiant XL270d Gen10 server and runs at 1.2V with a 2Rx4 organisation. The modules use the standard 288-pin RDIMM form factor and contain no heat spreaders.

Who this suits and who should look elsewhere

This memory fits administrators upgrading or repairing an HP ProLiant XL270d Gen10 that requires registered ECC DDR4. It will not work in standard desktop PCs or consumer motherboards that accept only unbuffered non-ECC DIMMs. Buyers needing load-reduced ECC modules or a different capacity per DIMM should choose another kit.

288-pin registered ECC DDR4 form factor

The modules are 288-pin DDR4 registered ECC RDIMMs, a physical and electrical standard that only fits server and workstation boards designed for registered memory. If the target system calls for unbuffered ECC or load-reduced DIMMs, these modules will not be compatible.

Istaknuto

  • 256 GB total capacity from four 64 GB modules
  • DDR4 2933 MHz CL21 at 1.2 V for efficient throughput
  • ECC registered design detects and corrects data errors
  • 288-pin RDIMM form factor fits HP ProLiant XL270d Gen10
  • Backward compatible with 2133, 2400 and 2666 MHz systems

Specifikacije

BrandOWC
Part Number2R9D42R4256S
Capacity256GB (4 x 64GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant XL270d Gen10

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Does the 288-pin DDR4 RDIMM form factor fit the HP ProLiant XL270d Gen10 memory slots?

Yes, the 288-pin DDR4 ECC Registered DIMM matches the slot layout of the HP ProLiant XL270d Gen10 server.

What is the correct installation sequence for the four 64 GB modules in the XL270d Gen10?

Populate all four DIMM slots following the server's channel population guide; the common mistake is mixing registered ECC with unbuffered or load-reduced modules, which this kit avoids.

Will the 1.2 V DDR4 2933 modules need replacement if the server runs at 2133, 2400 or 2666 MT/s?

No, the kit is backward compatible with 2133, 2400 and 2666 MT/s operation, so the same modules remain valid across those speeds.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.