Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR4 RDIMM modules with gold contacts and black chips

OWC

OWC 256GB (4x64GB) DDR4 2933 ECC RDIMM memory upgrade

SKU CH-VPR9-JWEMT

256 GB kit of four 64 GB DDR4 2933 ECC registered DIMMs for HP ProLiant XL270d Gen10 servers

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 256GB (4 x 64GB)

  • 256 GB total capacity from four 64 GB modules
  • DDR4 2933 MHz CL21 at 1.2 V for efficient throughput
  • ECC registered design detects and corrects data errors
  • 288-pin RDIMM form factor fits HP ProLiant XL270d Gen10
  • Backward compatible with 2133, 2400 and 2666 MHz systems

256GB DDR4 ECC RDIMM kit for HP ProLiant XL270d

This 256GB kit contains four 64GB DDR4 2933 PC4-23400 CL21 registered ECC modules. It is built for the HP ProLiant XL270d Gen10 server and runs at 1.2V with a 2Rx4 organisation. The modules use the standard 288-pin RDIMM form factor and contain no heat spreaders.

Who this suits and who should look elsewhere

This memory fits administrators upgrading or repairing an HP ProLiant XL270d Gen10 that requires registered ECC DDR4. It will not work in standard desktop PCs or consumer motherboards that accept only unbuffered non-ECC DIMMs. Buyers needing load-reduced ECC modules or a different capacity per DIMM should choose another kit.

288-pin registered ECC DDR4 form factor

The modules are 288-pin DDR4 registered ECC RDIMMs, a physical and electrical standard that only fits server and workstation boards designed for registered memory. If the target system calls for unbuffered ECC or load-reduced DIMMs, these modules will not be compatible.

Pluspunten

  • 256 GB total capacity from four 64 GB modules
  • DDR4 2933 MHz CL21 at 1.2 V for efficient throughput
  • ECC registered design detects and corrects data errors
  • 288-pin RDIMM form factor fits HP ProLiant XL270d Gen10
  • Backward compatible with 2133, 2400 and 2666 MHz systems

Specificaties

BrandOWC
Part Number2R9D42R4256S
Capacity256GB (4 x 64GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant XL270d Gen10

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does the 288-pin DDR4 RDIMM form factor fit the HP ProLiant XL270d Gen10 memory slots?

Yes, the 288-pin DDR4 ECC Registered DIMM matches the slot layout of the HP ProLiant XL270d Gen10 server.

What is the correct installation sequence for the four 64 GB modules in the XL270d Gen10?

Populate all four DIMM slots following the server's channel population guide; the common mistake is mixing registered ECC with unbuffered or load-reduced modules, which this kit avoids.

Will the 1.2 V DDR4 2933 modules need replacement if the server runs at 2133, 2400 or 2666 MT/s?

No, the kit is backward compatible with 2133, 2400 and 2666 MT/s operation, so the same modules remain valid across those speeds.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.