Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green rectangular circuit board with gold edge connectors and black memory chips

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 1.5V SODIMM for HP 6300 Pro AIO

SKU CH-WMQS-THE50

8GB DDR3 1600 CL11 SODIMM upgrades the HP 6300 Pro AIO with 204-pin 1.5V non-ECC memory

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 8 GB capacity lets you run more applications simultaneously
  • DDR3 1600 speed with CL11 timing delivers responsive system performance
  • 204-pin SODIMM form factor fits the HP 6300 Pro AIO slot exactly
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • 5 V unbuffered non-ECC module installs without configuration changes

System-Specific DDR3 SODIMM

This OWC module delivers 8 GB of DDR3 1600 memory in a 204-pin SODIMM form factor. It is built to JEDEC and RoHS standards and tested for the HP 6300 Pro AIO. The stick runs at 1.5 V with CL11 latency and a 2Rx8 rank configuration. No heat spreader is fitted.

HP 6300 Pro AIO owners adding memory

The module suits anyone upgrading the named all-in-one desktop with a single 8 GB stick. Buyers whose systems demand ECC registered memory, a different pin count, or a voltage other than 1.5 V should look elsewhere. The part is unbuffered and non-ECC by design.

204-pin DDR3 1600 SODIMM form factor

The 204-pin DDR3 SODIMM interface is the single specification that decides fitment. Only platforms accepting this exact physical and electrical standard will accept the module. Verify the slot type before purchase.

Istaknuto

  • 8 GB capacity lets you run more applications simultaneously
  • DDR3 1600 speed with CL11 timing delivers responsive system performance
  • 204-pin SODIMM form factor fits the HP 6300 Pro AIO slot exactly
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • 5 V unbuffered non-ECC module installs without configuration changes

Specifikacije

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP 6300 Pro AIO

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Will the 1.5V SODIMM need replacement due to wear?

DDR3 memory has no moving parts and is designed to last the system's lifetime; replacement is only needed if a fault occurs.

What limits performance during sustained use on the HP 6300 Pro AIO?

The CL11 latency at 1600MHz sets the access speed ceiling; thermal throttling is unlikely without a heat spreader in this AIO chassis.

How much heat and power does the 8GB module draw when running all day?

At 1.5V the module draws minimal power and produces low heat; the unbuffered 2Rx8 design runs cool inside the 6300 Pro AIO.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.