Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green circuit board with black memory chips and gold edge connector

OWC

OWC 8GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM Dell OptiPlex 3080 3090 XE3

SKU CH-NYNV-TNJ4J

An 8 GB DDR4 module running at 2666 MHz with CL19 timing, built for Dell OptiPlex 3080, 3090 and XE3 systems

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • Boosts Dell OptiPlex responsiveness with 8GB DDR4 2666MHz CL19 module
  • JEDEC compliant 1.2V design ensures stable, warranty-safe upgrades
  • Backward compatible with 2133MHz and 2400MHz systems for flexible deployment
  • Unbuffered 288-pin UDIMM fits 3080, 3090 and XE3 SFF and Tower chassis
  • Single-rank 1Rx8 architecture delivers efficient multitasking performance for daily workloads

Dell OptiPlex 3080 and 3090 Memory

This 8GB DDR4 UDIMM is built for Dell OptiPlex 3080 SFF, 3080 Tower, 3090 SFF, 3090 Tower and XE3 systems. It delivers a straightforward capacity increase for office workstations handling everyday productivity tasks. The module follows JEDEC standards to ensure a warranty-safe upgrade path for these specific platforms.

Sustained 2666MHz Operation

The memory runs at PC4-21300 speed with CL19 latency and 1.2V voltage under continuous workloads. Unbuffered, non-ECC design means it behaves like standard desktop memory during extended multitasking sessions. Backward compatibility with 2133MHz and 2400MHz allows stable operation if the system defaults to a lower frequency.

Tool-Free DIMM Installation

The 288-pin UDIMM slots into the motherboard without extra cables or brackets. Most cases only require opening the chassis side panel and pressing the module until the retention clips click. The main risk is inserting the stick backwards or not seating it fully, which prevents the system from posting.

Istaknuto

  • Boosts Dell OptiPlex responsiveness with 8GB DDR4 2666MHz CL19 module
  • JEDEC compliant 1.2V design ensures stable, warranty-safe upgrades
  • Backward compatible with 2133MHz and 2400MHz systems for flexible deployment
  • Unbuffered 288-pin UDIMM fits 3080, 3090 and XE3 SFF and Tower chassis
  • Single-rank 1Rx8 architecture delivers efficient multitasking performance for daily workloads

Specifikacije

BrandOWC
Part Number2U6D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 3080 SFF
Dell OptiPlex 3080 Tower
Dell OptiPlex 3090 SFF
Dell OptiPlex 3090 Tower
Dell OptiPlex XE3

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How much power does the 8 GB DDR4 2666 MHz CL19 module draw at its rated 1.2 V?

The module runs at the standard DDR4 voltage of 1.2 V, keeping power draw low during continuous all-day operation.

Does my Dell OptiPlex 3080 or 3090 need anything beyond a free 288-pin UDIMM slot to use this memory?

No extra hardware is required; the stick fits any vacant 288-pin DDR4 UDIMM socket in the listed OptiPlex models.

Will this 2666 MHz CL19 kit run stably alongside existing 2133 MHz or 2400 MHz DDR4 modules?

Yes, the module is backward compatible with 2133 MHz and 2400 MHz DDR4 and will down-clock to match the slower sticks.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.