我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips and gold edge connector

OWC

OWC 8GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM Dell OptiPlex 3080 3090 XE3

SKU CH-NYNV-TNJ4J

An 8 GB DDR4 module running at 2666 MHz with CL19 timing, built for Dell OptiPlex 3080, 3090 and XE3 systems

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • Boosts Dell OptiPlex responsiveness with 8GB DDR4 2666MHz CL19 module
  • JEDEC compliant 1.2V design ensures stable, warranty-safe upgrades
  • Backward compatible with 2133MHz and 2400MHz systems for flexible deployment
  • Unbuffered 288-pin UDIMM fits 3080, 3090 and XE3 SFF and Tower chassis
  • Single-rank 1Rx8 architecture delivers efficient multitasking performance for daily workloads

Dell OptiPlex 3080 and 3090 Memory

This 8GB DDR4 UDIMM is built for Dell OptiPlex 3080 SFF, 3080 Tower, 3090 SFF, 3090 Tower and XE3 systems. It delivers a straightforward capacity increase for office workstations handling everyday productivity tasks. The module follows JEDEC standards to ensure a warranty-safe upgrade path for these specific platforms.

Sustained 2666MHz Operation

The memory runs at PC4-21300 speed with CL19 latency and 1.2V voltage under continuous workloads. Unbuffered, non-ECC design means it behaves like standard desktop memory during extended multitasking sessions. Backward compatibility with 2133MHz and 2400MHz allows stable operation if the system defaults to a lower frequency.

Tool-Free DIMM Installation

The 288-pin UDIMM slots into the motherboard without extra cables or brackets. Most cases only require opening the chassis side panel and pressing the module until the retention clips click. The main risk is inserting the stick backwards or not seating it fully, which prevents the system from posting.

商品特色

  • Boosts Dell OptiPlex responsiveness with 8GB DDR4 2666MHz CL19 module
  • JEDEC compliant 1.2V design ensures stable, warranty-safe upgrades
  • Backward compatible with 2133MHz and 2400MHz systems for flexible deployment
  • Unbuffered 288-pin UDIMM fits 3080, 3090 and XE3 SFF and Tower chassis
  • Single-rank 1Rx8 architecture delivers efficient multitasking performance for daily workloads

商品規格

BrandOWC
Part Number2U6D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 3080 SFF
Dell OptiPlex 3080 Tower
Dell OptiPlex 3090 SFF
Dell OptiPlex 3090 Tower
Dell OptiPlex XE3

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much power does the 8 GB DDR4 2666 MHz CL19 module draw at its rated 1.2 V?

The module runs at the standard DDR4 voltage of 1.2 V, keeping power draw low during continuous all-day operation.

Does my Dell OptiPlex 3080 or 3090 need anything beyond a free 288-pin UDIMM slot to use this memory?

No extra hardware is required; the stick fits any vacant 288-pin DDR4 UDIMM socket in the listed OptiPlex models.

Will this 2666 MHz CL19 kit run stably alongside existing 2133 MHz or 2400 MHz DDR4 modules?

Yes, the module is backward compatible with 2133 MHz and 2400 MHz DDR4 and will down-clock to match the slower sticks.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。