Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Pimoroni PIM358 Wildlife Camera development board with 32GB microSD card and camera module

Pimoroni

Pimoroni PIM358 Wildlife Camera 32GB development board

SKU CH-QTBD-CRK94

A Raspberry Pi Zero W development kit with a 32 GB microSD card pre-loaded with NOOBS and a camera module for building a wildlife camera

  • Ready for nature photography with Raspberry Pi Zero W
  • 32GB microSD pre-loaded with NOOBS for instant setup
  • Camera module included for wildlife capture
  • USB cable and heatsink supplied for power and cooling

Wildlife Camera Kit 32GB

This development board kit combines a Raspberry Pi Zero W with a camera module and a 32GB microSD card pre-loaded with NOOBS. It is designed for makers who want to build a Raspberry Pi-powered wildlife camera in collaboration with My Naturewatch. The package includes a USB A to micro B cable and a heatsink for thermal management during operation.

Beginner-Friendly Assembly

The kit arrives with all essential components in one box, so soldering is not required to start the build. Users insert the pre-loaded microSD card, connect the camera module via the board's ribbon connector, and attach the heatsink to the processor. A common issue is loose ribbon-cable seating, which causes the camera to go undetected on first boot.

Istaknuto

  • Ready for nature photography with Raspberry Pi Zero W
  • 32GB microSD pre-loaded with NOOBS for instant setup
  • Camera module included for wildlife capture
  • USB cable and heatsink supplied for power and cooling

Specifikacije

Za ovaj artikl još nisu objavljene specifikacije.

Pitanja o ovom artiklu

How do I confirm the wildlife camera is recording properly after assembly?

Power the board, let the motion detection trigger a capture, then remove the 32GB microSD card and review the saved images on another device.

What components are included and what must I source separately?

The kit supplies a Raspberry Pi Zero W, a camera module, a 32GB microSD card pre-loaded with NOOBS plus an SD adaptor, a USB A to micro B cable, and a heatsink; you will need to provide a power supply and an enclosure.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.