Sapphire Tech
Sapphire Tech PULSE Radeon RX 9070 16GB 11349-03-20G graphics card
A 16GB GDDR6 graphics card with a 256-bit bus, 3584 stream processors and boost clocks up to 2520 MHz, built on RDNA 4 architecture for PCIe 5.0 systems
- InterfacePCI Express 5.0 x16
- Chipset ManufacturerAMD
- GPU SeriesAMD Radeon RX 9000 Series
- GPURadeon RX 9070
- ArchitectureRDNA 4
- Game ClockUp to 2070 MHz
- 16GB GDDR6 memory handles large textures and high resolutions
- Boost clock up to 2520 MHz delivers strong gaming frame rates
- PCI Express 5.0 x16 interface provides high bandwidth to the CPU
- Dual-fan cooler on a 280 mm card keeps temperatures in check
- Four display outputs support multi-monitor setups up to 7680 x 4320
Built for 1440p and 4K gaming
The Sapphire PULSE Radeon RX 9070 ships with 16GB of GDDR6 memory across a 256-bit bus and 3584 stream processors. It targets enthusiasts who want high frame rates at 1440p and playable 4K performance without moving to a flagship tier. The PCI Express 5.0 x16 interface keeps data moving between the GPU and modern platforms.
Sustained load behaviour
A game clock of 2070 MHz and a boost clock up to 2520 MHz are supported by an effective memory speed of 20000 MHz. The 220W thermal design power and 650W recommended PSU indicate the card can hold elevated frequencies during extended sessions rather than throttling after a short burst. Two 8-pin connectors feed the board cleanly.
Thermals, noise and power draw
The double-fan cooler sits in a 2.5-slot, 280 mm long ATX form factor measuring 280 x 121 x 52 mm. Under typical gaming loads the fans spin up to move heat off the heatsink while staying within the 220W envelope. Idle power drops low enough for quiet desktop use and multi-monitor setups up to 7680 x 4320 resolution.
Istaknuto
- 16GB GDDR6 memory handles large textures and high resolutions
- Boost clock up to 2520 MHz delivers strong gaming frame rates
- PCI Express 5.0 x16 interface provides high bandwidth to the CPU
- Dual-fan cooler on a 280 mm card keeps temperatures in check
- Four display outputs support multi-monitor setups up to 7680 x 4320
Specifikacije
| Brand | SAPPHIRE |
|---|---|
| Series | PULSE |
| Model | 11349-03-20G |
| Part Number | 11349-03-20G |
| Interface | PCI Express 5.0 x16 |
| Chipset Manufacturer | AMD |
| GPU Series | AMD Radeon RX 9000 Series |
| GPU | Radeon RX 9070 |
| Architecture | RDNA 4 |
| Game Clock | Up to 2070 MHz |
| Boost Clock | Up to 2520 MHz |
| Stream Processors | 3584 |
| Effective Memory Clock | 20000 MHz (20 Gbps) |
| Memory Size | 16GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI |
| DisplayPort | 2 x DisplayPort 2.1a |
| Color | Black |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Double Fans |
| Thermal Design Power | 220W |
| Recommended PSU Wattage | 650W |
| Power Connector | 2 x 8-Pin |
| HDCP Ready | Yes |
| Form Factor | ATX |
| Max GPU Length | 280 mm |
| Card Dimensions (L x H) | 280 x 121 x 52 mm |
| Slot Width | 2.5 Slots |
| Težina pošiljke | 1.36 kg |
| Dimenzije pakiranja | 381 × 203 × 76 mm |
Pitanja o ovom artiklu
How loud and hot does the PULSE Radeon RX 9070 run under full load all day?
The card has a 220 W thermal design power and a double-fan cooler in a 2.5-slot ATX form factor. A 650 W power supply is recommended.
What power connectors and PSU capacity must my system already have for this RX 9070?
Two 8-pin PCIe power connectors are required and a 650 W PSU is recommended. The board uses a PCI Express 5.0 x16 slot.
Will the RX 9070 fit and work alongside my older motherboard and monitor setup?
It needs a PCIe 5.0 x16 slot, occupies 2.5 slots, and measures 280 mm long. Outputs are two HDMI and two DisplayPort 2.1a for up to 7680 x 4320 resolution.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.



