Solidigm D3-S4520 480GB M.2 2280 SATA enterprise SSD (SSDSCKKB480GZ1Z)
- M.2 2280
- 480GB
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Solidigm
A 240 GB enterprise SSD with SATA III interface, 144-layer TLC 3D NAND, up to 470 MBps sequential read and 233 MBps write, 44,000 random read IOPS, 15,500 random write IOPS.
Option 240GB 2.5"
The Solidigm D3-S4520 is a 240GB 2.5" SATA III drive built with 144L TLC 3D NAND. It targets server and storage arrays that need consistent read performance and a 2.5 DWPD endurance rating. The drive delivers up to 470 MBps sequential read and 44,000 random read IOPS with a 2,000,000 hour MTBF.
This model replaces consumer or entry-level SATA SSDs when workloads demand 1.0 PBW write endurance and steady 233 MBps sequential write speeds. The jump is worth it for mixed read-write applications that exceed 15,500 random write IOPS or require 102µs read latency and 61µs write latency under sustained load.
The drive operates from 0°C to 70°C while drawing 1W idle and 2.3W active, simplifying thermal planning in dense chassis. It withstands 1,000 G shock and 2.17 GRMS operating vibration, freeing administrators from extra ruggedisation hardware in standard rack environments.
| Brand | Solidigm |
|---|---|
| Model | D3-S4520 |
| Part Number | SSDSC2KB240GZ1Z |
| Form Factor | 2.5" |
| Capacity | 240GB |
| Memory Components | 144L TLC 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 470 MBps |
| Max Sequential Write | Up to 233 MBps |
| 4KB Random Read | Up to 44,000 IOPS |
| 4KB Random Write | Up to 15,500 IOPS |
| Read Latency | 102µs |
| Write Latency | 61µs |
| Endurance | Up to 2.5 DWPD / Up to 1.0 PBW |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 1W |
| Power Consumption (Active) | 2.3W |
| Operating Temperature | 0°C to 70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 59.2 gms |
| Težina pošiljke | 0.09 kg |
| Dimenzije pakiranja | 140 × 108 × 13 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
The drive uses a 2.5 inch SATA form factor; most server trays accept the standard 7 mm height but verify your chassis specifications before ordering.
Attach both the SATA data cable and the 15 pin SATA power connector; a common mistake is leaving the power cable loose which prevents the drive from spinning up.
The drive is rated for up to 2.5 DWPD or 1.0 PBW; monitor SMART wear indicators and replace once the media wearout counter approaches the rated limit.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?