Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black standalone SATA duplicator with seven hot-swap drive slots and LCD screen

Systor

Systor SYS307DP 1:7 SATA Duplicator & Sanitizer 18GB/min 300W

SKU CH-HMET-E0X6J

Standalone SATA duplicator copies or sanitises one source drive to seven targets at 18 GB per minute with DoD 5220.22-M erase compliance

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 07

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Copies up to seven drives simultaneously from one source
  • 18 GB per minute transfer rate cuts duplication time
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Standalone operation needs no host computer or software
  • Hot-swap bays accept 2.5 and 3.5 inch SATA drives directly

Systor SYS307DP 1:7 SATA Duplicator

The Systor SYS307DP is a standalone hard-drive duplicator and sanitiser that copies one SATA source to up to seven SATA targets at once. It handles 2.5" and 3.5" HDDs or SSDs without adapters and runs without a host computer. An LCD screen shows progress and status during operation. The unit delivers a sustained 18.0 GB/min transfer rate from a 128 MB buffer.

Suited for IT teams cloning SATA drives in bulk

This duplicator fits workflows that need simultaneous, bit-for-bit cloning of SATA storage with optional DoD 5220.22-M sanitisation. It is not suited for environments that require non-SATA interfaces, nor for users who need more than seven simultaneous targets. The standalone design also means it cannot be controlled from host software or scheduled via a network.

18 GB/min sustained copy speed

The single specification that decides fit is the 18.0 GB/min (300 MB/sec) data transfer rate across all seven target ports. If your SATA drives and workload can saturate that throughput, the SYS307DP will keep all bays fed; if you need higher per-drive bandwidth, this unit will be the bottleneck.

Istaknuto

  • Copies up to seven drives simultaneously from one source
  • 18 GB per minute transfer rate cuts duplication time
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Standalone operation needs no host computer or software
  • Hot-swap bays accept 2.5 and 3.5 inch SATA drives directly

Specifikacije

BrandSystor
ModelSYS307DP
TypeHard Drive Duplicator
Target1 to 7
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 300 W
Package Contentssee pictures for details

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Which copy mode should I choose between Systems and Files or Whole HDD?

Systems and Files copies only the used data area so the job finishes faster; Whole HDD copies every sector including empty space for a bit-for-bit clone.

What does 18 GB/min mean when I am duplicating seven drives at once?

The duplicator sustains up to 18 GB per minute per target port, so all seven drives receive data at that rate simultaneously.

What does the SATA interface cap in practice for this duplicator?

The SATA ports deliver up to 300 MB/sec (18 GB/min) per bay, which is the maximum throughput the unit can sustain.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.