Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black standalone SATA duplicator with seven hot-swap drive slots and LCD screen

Systor

Systor SYS307DP 1:7 SATA Duplicator & Sanitizer 18GB/min 300W

SKU CH-HMET-E0X6J

Standalone SATA duplicator copies or sanitises one source drive to seven targets at 18 GB per minute with DoD 5220.22-M erase compliance

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 07

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Copies up to seven drives simultaneously from one source
  • 18 GB per minute transfer rate cuts duplication time
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Standalone operation needs no host computer or software
  • Hot-swap bays accept 2.5 and 3.5 inch SATA drives directly

Systor SYS307DP 1:7 SATA Duplicator

The Systor SYS307DP is a standalone hard-drive duplicator and sanitiser that copies one SATA source to up to seven SATA targets at once. It handles 2.5" and 3.5" HDDs or SSDs without adapters and runs without a host computer. An LCD screen shows progress and status during operation. The unit delivers a sustained 18.0 GB/min transfer rate from a 128 MB buffer.

Suited for IT teams cloning SATA drives in bulk

This duplicator fits workflows that need simultaneous, bit-for-bit cloning of SATA storage with optional DoD 5220.22-M sanitisation. It is not suited for environments that require non-SATA interfaces, nor for users who need more than seven simultaneous targets. The standalone design also means it cannot be controlled from host software or scheduled via a network.

18 GB/min sustained copy speed

The single specification that decides fit is the 18.0 GB/min (300 MB/sec) data transfer rate across all seven target ports. If your SATA drives and workload can saturate that throughput, the SYS307DP will keep all bays fed; if you need higher per-drive bandwidth, this unit will be the bottleneck.

Privalumai

  • Copies up to seven drives simultaneously from one source
  • 18 GB per minute transfer rate cuts duplication time
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Standalone operation needs no host computer or software
  • Hot-swap bays accept 2.5 and 3.5 inch SATA drives directly

Specifikacijos

BrandSystor
ModelSYS307DP
TypeHard Drive Duplicator
Target1 to 7
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 300 W
Package Contentssee pictures for details

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Which copy mode should I choose between Systems and Files or Whole HDD?

Systems and Files copies only the used data area so the job finishes faster; Whole HDD copies every sector including empty space for a bit-for-bit clone.

What does 18 GB/min mean when I am duplicating seven drives at once?

The duplicator sustains up to 18 GB per minute per target port, so all seven drives receive data at that rate simultaneously.

What does the SATA interface cap in practice for this duplicator?

The SATA ports deliver up to 300 MB/sec (18 GB/min) per bay, which is the maximum throughput the unit can sustain.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.