Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black standalone SATA duplicator with three hot-swap slots and LCD screen

Systor

Systor SYS303DP 1:3 SATA Hard Drive Duplicator & Sanitizer

SKU CH-Y3R8-42BSE

Standalone SATA duplicator copies or sanitises one source to three targets at 18 GB per minute with DoD 5220.22‑M erase

  • TypeHard Drive Duplicator
  • Target1 to 3
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 03

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Copies up to three drives simultaneously from one source
  • 18 GB per minute transfer rate with 128 MB buffer
  • Standalone operation with LCD screen — no computer needed
  • DoD 5220.22-M compliant sanitisation for secure data erasure
  • Supports 2.5" and 3.5" SATA drives without adapters

Standalone 1-to-3 SATA Duplicator

The Systor SYS303DP duplicates one SATA source drive onto up to three target drives without a host computer. It accepts 2.5 and 3.5 inch SATA hard drives or solid-state drives directly in its slots. An LCD screen reports progress while the unit runs from a 115/230 V, 50/60 Hz, 250 W internal supply.

Suited for batch cloning and sanitising SATA drives

IT teams and data-recovery labs that need simultaneous, standalone copies of SATA media will benefit. The device offers Systems-and-Files or Whole-Media copy modes plus a DoD 5220.22-M compliant erase function. Buyers who need more than three target ports or a different drive interface should consider other equipment.

300 MB/s peak transfer rate

The duplicator sustains up to 300 MB/s (18.0 GB/min) across its SATA ports with 128 MB of buffer memory. This throughput determines how quickly large drives can be cloned or wiped in a single session.

Privalumai

  • Copies up to three drives simultaneously from one source
  • 18 GB per minute transfer rate with 128 MB buffer
  • Standalone operation with LCD screen — no computer needed
  • DoD 5220.22-M compliant sanitisation for secure data erasure
  • Supports 2.5" and 3.5" SATA drives without adapters

Specifikacijos

BrandSystor
ModelSYS303DP
TypeHard Drive Duplicator
Target1 to 3
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 250 W
Package Contentssee pictures for details

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What drives must I already have to use the Systor SYS303DP duplicator?

You need one source SATA drive and up to three target SATA drives, either 2.5-inch SSD or 3.5-inch HDD, because the unit accepts both sizes without adapters.

Can I keep using my existing SATA drives with this duplicator?

Yes, the SYS303DP copies sector-by-sector to any brand or format of SATA drive, so your current 2.5-inch or 3.5-inch drives work as source or targets without reformatting.

How do I confirm the duplicator finished a DoD 5220.22-M erase correctly?

The LCD screen reports pass/fail status for each port after the multi-pass DoD 5220.22-M sanitation cycle completes, showing that no trace of data remains.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.