Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black standalone SATA duplicator with three hot-swap slots and LCD screen

Systor

Systor SYS303DP 1:3 SATA Hard Drive Duplicator & Sanitizer

SKU CH-Y3R8-42BSE

Standalone SATA duplicator copies or sanitises one source to three targets at 18 GB per minute with DoD 5220.22‑M erase

  • TypeHard Drive Duplicator
  • Target1 to 3
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 03

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Copies up to three drives simultaneously from one source
  • 18 GB per minute transfer rate with 128 MB buffer
  • Standalone operation with LCD screen — no computer needed
  • DoD 5220.22-M compliant sanitisation for secure data erasure
  • Supports 2.5" and 3.5" SATA drives without adapters

Standalone 1-to-3 SATA Duplicator

The Systor SYS303DP duplicates one SATA source drive onto up to three target drives without a host computer. It accepts 2.5 and 3.5 inch SATA hard drives or solid-state drives directly in its slots. An LCD screen reports progress while the unit runs from a 115/230 V, 50/60 Hz, 250 W internal supply.

Suited for batch cloning and sanitising SATA drives

IT teams and data-recovery labs that need simultaneous, standalone copies of SATA media will benefit. The device offers Systems-and-Files or Whole-Media copy modes plus a DoD 5220.22-M compliant erase function. Buyers who need more than three target ports or a different drive interface should consider other equipment.

300 MB/s peak transfer rate

The duplicator sustains up to 300 MB/s (18.0 GB/min) across its SATA ports with 128 MB of buffer memory. This throughput determines how quickly large drives can be cloned or wiped in a single session.

Prednosti

  • Copies up to three drives simultaneously from one source
  • 18 GB per minute transfer rate with 128 MB buffer
  • Standalone operation with LCD screen — no computer needed
  • DoD 5220.22-M compliant sanitisation for secure data erasure
  • Supports 2.5" and 3.5" SATA drives without adapters

Špecifikácie

BrandSystor
ModelSYS303DP
TypeHard Drive Duplicator
Target1 to 3
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 250 W
Package Contentssee pictures for details

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What drives must I already have to use the Systor SYS303DP duplicator?

You need one source SATA drive and up to three target SATA drives, either 2.5-inch SSD or 3.5-inch HDD, because the unit accepts both sizes without adapters.

Can I keep using my existing SATA drives with this duplicator?

Yes, the SYS303DP copies sector-by-sector to any brand or format of SATA drive, so your current 2.5-inch or 3.5-inch drives work as source or targets without reformatting.

How do I confirm the duplicator finished a DoD 5220.22-M erase correctly?

The LCD screen reports pass/fail status for each port after the multi-pass DoD 5220.22-M sanitation cycle completes, showing that no trace of data remains.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.