Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Black standalone SATA duplicator with three hot-swap slots and LCD screen

Systor

Systor SYS303DP 1:3 SATA Hard Drive Duplicator & Sanitizer

SKU CH-Y3R8-42BSE

Standalone SATA duplicator copies or sanitises one source to three targets at 18 GB per minute with DoD 5220.22‑M erase

  • TypeHard Drive Duplicator
  • Target1 to 3
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 03

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Copies up to three drives simultaneously from one source
  • 18 GB per minute transfer rate with 128 MB buffer
  • Standalone operation with LCD screen — no computer needed
  • DoD 5220.22-M compliant sanitisation for secure data erasure
  • Supports 2.5" and 3.5" SATA drives without adapters

Standalone 1-to-3 SATA Duplicator

The Systor SYS303DP duplicates one SATA source drive onto up to three target drives without a host computer. It accepts 2.5 and 3.5 inch SATA hard drives or solid-state drives directly in its slots. An LCD screen reports progress while the unit runs from a 115/230 V, 50/60 Hz, 250 W internal supply.

Suited for batch cloning and sanitising SATA drives

IT teams and data-recovery labs that need simultaneous, standalone copies of SATA media will benefit. The device offers Systems-and-Files or Whole-Media copy modes plus a DoD 5220.22-M compliant erase function. Buyers who need more than three target ports or a different drive interface should consider other equipment.

300 MB/s peak transfer rate

The duplicator sustains up to 300 MB/s (18.0 GB/min) across its SATA ports with 128 MB of buffer memory. This throughput determines how quickly large drives can be cloned or wiped in a single session.

Erősségek

  • Copies up to three drives simultaneously from one source
  • 18 GB per minute transfer rate with 128 MB buffer
  • Standalone operation with LCD screen — no computer needed
  • DoD 5220.22-M compliant sanitisation for secure data erasure
  • Supports 2.5" and 3.5" SATA drives without adapters

Műszaki adatok

BrandSystor
ModelSYS303DP
TypeHard Drive Duplicator
Target1 to 3
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 250 W
Package Contentssee pictures for details

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

What drives must I already have to use the Systor SYS303DP duplicator?

You need one source SATA drive and up to three target SATA drives, either 2.5-inch SSD or 3.5-inch HDD, because the unit accepts both sizes without adapters.

Can I keep using my existing SATA drives with this duplicator?

Yes, the SYS303DP copies sector-by-sector to any brand or format of SATA drive, so your current 2.5-inch or 3.5-inch drives work as source or targets without reformatting.

How do I confirm the duplicator finished a DoD 5220.22-M erase correctly?

The LCD screen reports pass/fail status for each port after the multi-pass DoD 5220.22-M sanitation cycle completes, showing that no trace of data remains.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.