Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Natural 2.85 mm nylon filament on a 5 inch spool

Taulman 3D

Taulman 3D Nylon 680 Filament 2.85mm 1lb Natural 3D Printers Accessories

SKU CH-8Z50-YXG98

FDA-approved nylon filament for food-safe parts, prints at 250-255 °C on a 5-inch spool

  • ColorNatural
  • TypeFilament
  • FDA-approved filament for food-contact prints
  • Compatible with ethylene oxide and flash-steam sterilisation
  • Prints at 250-255 °C with 30-65 °C bed
  • 6900 PSI tensile strength with 34 % elongation
  • 85 mm diameter on a 5-inch, 1 lb spool

Food-safe nylon filament

Taulman 3D Nylon 680 is a pure-polymer filament rated for food and beverage contact under 21 CFR 177.1500 and 177.1395. It meets USP Class VI cytotoxicity requirements via MEM elution testing performed under FDA GMP regulations 21 CFR 210, 211 and 820. The material carries CAS registry number 51995-62-1 and contains no additives from chemical manufacturing or extrusion. It suits makers producing end-use parts that require regulatory compliance.

Sustained thermal behaviour

Printing temperatures of 250 to 255 °C and bed temperatures of 30 to 65 °C provide stable layer adhesion during long prints. The filament delivers a tensile strength of 6900 PSI with 34 percent elongation, indicating consistent mechanical performance across extended builds. Compatibility with ethylene oxide and flash steam post-processing allows repeated sterilisation cycles without degrading the polymer structure. Most FFF printers running standard Nylon 645 profiles can process this material without hardware changes.

Upgrade path and limits

This filament replaces standard nylons when FDA-approved food contact or validated sterilisation is required. The jump is worth it for medical device prototypes, custom kitchen tools or fluid-handling components that must pass regulatory review. It is not for buyers who need a lower printing temperature, a larger spool format or a filled composite for added stiffness. The 1 lb, 5-inch spool suits trial runs and low-volume production rather than continuous high-throughput printing.

Istaknuto

  • FDA-approved filament for food-contact prints
  • Compatible with ethylene oxide and flash-steam sterilisation
  • Prints at 250-255 °C with 30-65 °C bed
  • 6900 PSI tensile strength with 34 % elongation
  • 85 mm diameter on a 5-inch, 1 lb spool

Specifikacije

Brandtaulman3d
ColorNatural
TypeFilament

Pitanja o ovom artiklu

Does this Nylon 680 filament produce strong fumes or need extra cooling during long prints?

It prints at 250-255 °C with a bed at 30-65 °C, temperatures typical for many FFF printers, and the pure polymer contains no additives from manufacturing or extrusion.

My printer takes 2.85 mm filament — will this spool fit and feed reliably?

Yes, the filament is 2.85 mm diameter on a 5-inch spool weighing 1 lb, matching printers that accept that format.

Can I print parts with Nylon 680 that will touch food or drink?

The material is food and beverage rated, FDA approved under 21 CFR 177.1500 and 177.1395, and passes MEM elution cytotoxicity testing.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.