TRYX F-R120P-NN1M-G0W ROTA PRO 120 White case fan 120mm 2250RPM 81.32CFM
- 1 Fan
- No Controller
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
TRYX
A 140 mm case fan with fluid dynamic bearing, liquid crystal polymer blades and 4‑pin PWM control delivering up to 100.3 CFM at 1650 RPM while staying under 32 dBA
Fan Size 140mm
Option 140mm
The TRYX ROTA PRO 140 is a 140mm case fan built for builders who want strong airflow with low noise. It uses a 4-pin PWM connector for automatic speed control between 500 and 1650RPM. The fan frame is made from industrial-grade PBT and the blades from Liquid Crystal Polymer for durability. It suits standard case mounts, CPU air coolers, and AIO radiators.
This fan replaces basic 140mm fans that use sleeve bearings or lower static pressure. The jump is worth it when you need 2.53mmAq pressure for restrictive radiators or dense heatsink fins. It delivers 100.3CFM maximum airflow while keeping noise at 32dBA under full load. Buyers who need higher static pressure than 2.53mmAq or speeds above 1650RPM should look elsewhere.
Installation uses standard 140mm mounting holes and includes four large noise-damping pads to absorb vibration. The fluid dynamic bearing and three-phase six-pole motor keep rotation stable. An extended cable is supplied for routing flexibility. The only common issue is ensuring the 25mm thickness clears nearby components in tight layouts.
| Brand | TRYX |
|---|---|
| Model | ROTA PRO 140 |
| Part Number | F-R140P-NN1M-G0W |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Fluid Dynamic Bearing |
| RPM | 500~1650RPM±10% |
| Air Flow | 100.3CFM |
| Air Pressure | 2.53mmAq |
| Noise Level | 32dBA |
| Power Connector | 4 Pin |
| Color | Black |
| Features | Liquid Crystal Polymer |
| Dimensions | 140x140x25mm |
| Package Contents | ROTA PRO Fan, Extended Cabel, Accessories |
| Težina pošiljke | 0.23 kg |
| Dimenzije pakiranja | 152 × 152 × 38 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Yes, the fan measures 140x140x25mm and is listed as compatible with cases, AIO radiators and CPU air coolers in push or pull configurations.
Plug the 4-pin PWM connector directly into a motherboard fan header; the extended cable simply lengthens the reach and carries the same four wires, so orientation stays identical.
The FDB is rated for long life with no lubrication needed; clean the LCP blades with compressed air whenever dust buildup reduces the 100.3CFM airflow or raises noise above 32dBA.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?