Western Digital
Western Digital WDS100T5G0A Green SATA 1TB 2.5" 7mm internal SSD
A 1 TB 2.5 inch SATA SSD delivering up to 545 MB/s for faster boot and load times
- Boot faster with SATA SSD speeds up to 545MB/s
- Add up to 2TB of solid-state storage capacity
- Shock-resistant design protects against bumps and drops
- Free Acronis True Image software simplifies data migration
- SanDisk Dashboard download monitors drive health and status
WD Green SATA 1 TB internal SSD
The Western Digital WDS100T5G0A is a 1 TB SATA solid-state drive in a 2.5-inch, 7 mm form factor designed for laptops and desktops. It delivers sequential read speeds up to 545 MB/s and uses solid-state technology for shock resistance against bumps and drops. The drive includes access to SanDisk Dashboard for monitoring and Acronis True Image for data migration.
Suits SATA 2.5-inch bays not M.2 2280 slots
This drive fits systems with a standard 2.5-inch SATA bay and 7 mm clearance, making it a direct replacement for mechanical hard drives in many laptops and desktops. Builders whose chassis only accepts M.2 2280 modules or who require a PCIe interface should look at a different form factor. The SATA connection limits throughput to the figures stated.
SATA interface with 545 MB/s sequential read
The single specification that decides compatibility is the SATA interface combined with the quoted 545 MB/s maximum sequential read speed. If the host system provides a SATA port and the physical 2.5-inch 7 mm slot, the drive will operate at its rated performance. Any platform lacking a SATA connection cannot use this SSD.
Istaknuto
- Boot faster with SATA SSD speeds up to 545MB/s
- Add up to 2TB of solid-state storage capacity
- Shock-resistant design protects against bumps and drops
- Free Acronis True Image software simplifies data migration
- SanDisk Dashboard download monitors drive health and status
Specifikacije
Za ovaj artikl još nisu objavljene specifikacije.
Pitanja o ovom artiklu
How much power does the 1TB WD Green SATA SSD draw when running continuously?
The drive uses the standard SATA power connector and consumes only a few watts under load, producing minimal heat and no audible noise during all-day operation.
What cables or brackets do I need to install this 2.5" 7mm SATA drive in my desktop?
You need a standard SATA data cable and a SATA power lead from your PSU; if your case only has 3.5" bays, a 2.5"-to-3.5" adapter bracket is also required.
Will this SATA SSD work alongside my older mechanical hard drive on the same controller?
Yes, it connects via a regular SATA port and appears as a standard AHCI device, so it coexists with legacy HDDs without driver conflicts or speed negotiation issues.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
