Western Digital
Western Digital WDS100T5G0A Green SATA 1TB 2.5" 7mm internal SSD
A 1 TB 2.5 inch SATA SSD delivering up to 545 MB/s for faster boot and load times
- Boot faster with SATA SSD speeds up to 545MB/s
- Add up to 2TB of solid-state storage capacity
- Shock-resistant design protects against bumps and drops
- Free Acronis True Image software simplifies data migration
- SanDisk Dashboard download monitors drive health and status
WD Green SATA 1 TB internal SSD
The Western Digital WDS100T5G0A is a 1 TB SATA solid-state drive in a 2.5-inch, 7 mm form factor designed for laptops and desktops. It delivers sequential read speeds up to 545 MB/s and uses solid-state technology for shock resistance against bumps and drops. The drive includes access to SanDisk Dashboard for monitoring and Acronis True Image for data migration.
Suits SATA 2.5-inch bays not M.2 2280 slots
This drive fits systems with a standard 2.5-inch SATA bay and 7 mm clearance, making it a direct replacement for mechanical hard drives in many laptops and desktops. Builders whose chassis only accepts M.2 2280 modules or who require a PCIe interface should look at a different form factor. The SATA connection limits throughput to the figures stated.
SATA interface with 545 MB/s sequential read
The single specification that decides compatibility is the SATA interface combined with the quoted 545 MB/s maximum sequential read speed. If the host system provides a SATA port and the physical 2.5-inch 7 mm slot, the drive will operate at its rated performance. Any platform lacking a SATA connection cannot use this SSD.
Акценти
- Boot faster with SATA SSD speeds up to 545MB/s
- Add up to 2TB of solid-state storage capacity
- Shock-resistant design protects against bumps and drops
- Free Acronis True Image software simplifies data migration
- SanDisk Dashboard download monitors drive health and status
Спецификации
Все още няма публикувани спецификации за този артикул.
Въпроси за този артикул
How much power does the 1TB WD Green SATA SSD draw when running continuously?
The drive uses the standard SATA power connector and consumes only a few watts under load, producing minimal heat and no audible noise during all-day operation.
What cables or brackets do I need to install this 2.5" 7mm SATA drive in my desktop?
You need a standard SATA data cable and a SATA power lead from your PSU; if your case only has 3.5" bays, a 2.5"-to-3.5" adapter bracket is also required.
Will this SATA SSD work alongside my older mechanical hard drive on the same controller?
Yes, it connects via a regular SATA port and appears as a standard AHCI device, so it coexists with legacy HDDs without driver conflicts or speed negotiation issues.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
