XPG GAMMIX S11 Pro 1TB internal SSD with heatsink
- Internal Solid Stat…
- Consumer
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
XPG
2 TB PCIe 3.0 x4 NVMe 1.3 SSD with heatsink reaching 3500 MB/s read and 3000 MB/s write
Options 2TB S11 Pro
This internal SSD uses the M.2 2280 form factor and a PCIe 3.0 x4 interface with NVMe 1.3 support. It targets gamers, PC enthusiasts, overclockers and video rendering professionals who need high sequential throughput. The integrated heatsink lowers drive temperature by up to 10°C compared to models without one, aiding stability under sustained load.
The drive fits standard M.2 slots on current Intel and AMD desktop platforms. Ensure the motherboard BIOS is up to date so the NVMe device is detected at boot. A frequent problem is thermal throttling if the heatsink contacts a motherboard shield or backplate without a gap; leave a small clearance for airflow.
With 2TB of 3D NAND storage and a 1280 TBW endurance rating, the drive handles large game libraries, project files and heavy write workloads comfortably. Sequential speeds reach 3500 MB/s read and 3000 MB/s write, while random performance hits 360000 IOPS. Under extreme, sustained write scenarios the SLC cache can saturate, causing speeds to drop toward native NAND levels.
| Brand | XPG |
|---|---|
| Series | GAMMIX S11 Pro |
| Model | AGAMMIXS11P-2TT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Controller | SMI SM2262EN |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 3000 MBps |
| 4KB Random Read | Up to 360,000 IOPS |
| 4KB Random Write | Up to 360,000 IOPS |
| Terabytes Written (TBW) | 1280TB |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Power Consumption (Idle) | 0.14W |
| Power Consumption (Active) | 0.33W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 6.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 11.00g |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Check that the drive is detected at PCIe 3.0 x4 speed in BIOS or Device Manager, then run a benchmark to confirm sequential reads near 3500 MB/s and writes near 3000 MB/s with random IOPS around 360000.
The box contains the M.2 2280 SSD with its integrated heatsink already attached; you must provide a compatible M.2 slot and, if your motherboard lacks a mounting standoff, the correct screw.
The 2TB model offers 1280 TBW endurance and up to 3500/3000 MB/s speeds, making it the largest capacity in the S11 Pro line for sustained high-demand workloads.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?