XPG GAMMIX S11 Pro 1TB internal SSD with heatsink
- Internal Solid Stat…
- Consumer
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
XPG
2 TB PCIe 3.0 x4 NVMe 1.3 SSD with heatsink reaching 3500 MB/s read and 3000 MB/s write
Options 2TB S11 Pro
This internal SSD uses the M.2 2280 form factor and a PCIe 3.0 x4 interface with NVMe 1.3 support. It targets gamers, PC enthusiasts, overclockers and video rendering professionals who need high sequential throughput. The integrated heatsink lowers drive temperature by up to 10°C compared to models without one, aiding stability under sustained load.
The drive fits standard M.2 slots on current Intel and AMD desktop platforms. Ensure the motherboard BIOS is up to date so the NVMe device is detected at boot. A frequent problem is thermal throttling if the heatsink contacts a motherboard shield or backplate without a gap; leave a small clearance for airflow.
With 2TB of 3D NAND storage and a 1280 TBW endurance rating, the drive handles large game libraries, project files and heavy write workloads comfortably. Sequential speeds reach 3500 MB/s read and 3000 MB/s write, while random performance hits 360000 IOPS. Under extreme, sustained write scenarios the SLC cache can saturate, causing speeds to drop toward native NAND levels.
| Brand | XPG |
|---|---|
| Series | GAMMIX S11 Pro |
| Model | AGAMMIXS11P-2TT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Controller | SMI SM2262EN |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 3000 MBps |
| 4KB Random Read | Up to 360,000 IOPS |
| 4KB Random Write | Up to 360,000 IOPS |
| Terabytes Written (TBW) | 1280TB |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Power Consumption (Idle) | 0.14W |
| Power Consumption (Active) | 0.33W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 6.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 11.00g |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Check that the drive is detected at PCIe 3.0 x4 speed in BIOS or Device Manager, then run a benchmark to confirm sequential reads near 3500 MB/s and writes near 3000 MB/s with random IOPS around 360000.
The box contains the M.2 2280 SSD with its integrated heatsink already attached; you must provide a compatible M.2 slot and, if your motherboard lacks a mounting standoff, the correct screw.
The 2TB model offers 1280 TBW endurance and up to 3500/3000 MB/s speeds, making it the largest capacity in the S11 Pro line for sustained high-demand workloads.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?