NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
16 GB DDR3L 1333 MHz ECC registered server DIMM with 1.35 V low-voltage operation
A-Tech 16GB DDR3L 1333 ECC RDIMM 2Rx4 Server Memory is a registered DIMM built for server and workstation platforms that require error-correcting code memory. It runs at 1333 MHz with CL9 latency and operates at 1.35V low voltage. The module uses a 240-pin form factor and carries a 2Rx4 rank configuration.
This module suits administrators upgrading or repairing systems that specifically accept DDR3L 1333 ECC registered DIMMs with a 2Rx4 organisation. Buyers who need non-ECC unbuffered memory, a different voltage, a higher speed grade or a larger single-module capacity should look at other options.
Installation follows the standard DIMM slot procedure: align the notch, press firmly until the retention clips engage, then verify detection in the system BIOS. The most common issues are mixing registered and unbuffered modules, populating slots in an unsupported sequence, or using a platform that does not support 1.35V DDR3L operation.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Elpida |
| Model | EBJ17RG4EFWD-DJ-F |
| Capacity | 16GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | EBJ17RG4EFWD-DJ-F |
The module uses a standard 240-pin DDR3 DIMM slot, but the motherboard must support registered ECC memory and 1.35V DDR3L operation.
DDR3L is backward compatible with 1.5V DDR3 slots and will run at the higher voltage if the platform does not support low-voltage operation.
Check the BIOS memory information or OS system properties for 16GB total capacity and verify ECC is reported as active or enabled.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?