NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
16 GB DDR3L 1333 MHz ECC registered server DIMM with 1.35 V low-voltage operation
A-Tech 16GB DDR3L 1333 ECC RDIMM 2Rx4 Server Memory is a registered DIMM built for server and workstation platforms that require error-correcting code memory. It runs at 1333 MHz with CL9 latency and operates at 1.35V low voltage. The module uses a 240-pin form factor and carries a 2Rx4 rank configuration.
This module suits administrators upgrading or repairing systems that specifically accept DDR3L 1333 ECC registered DIMMs with a 2Rx4 organisation. Buyers who need non-ECC unbuffered memory, a different voltage, a higher speed grade or a larger single-module capacity should look at other options.
Installation follows the standard DIMM slot procedure: align the notch, press firmly until the retention clips engage, then verify detection in the system BIOS. The most common issues are mixing registered and unbuffered modules, populating slots in an unsupported sequence, or using a platform that does not support 1.35V DDR3L operation.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Elpida |
| Model | EBJ17RG4EFWD-DJ-F |
| Capacity | 16GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | EBJ17RG4EFWD-DJ-F |
The module uses a standard 240-pin DDR3 DIMM slot, but the motherboard must support registered ECC memory and 1.35V DDR3L operation.
DDR3L is backward compatible with 1.5V DDR3 slots and will run at the higher voltage if the platform does not support low-voltage operation.
Check the BIOS memory information or OS system properties for 16GB total capacity and verify ECC is reported as active or enabled.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?