Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3L ECC registered DIMM with black chips

A-Tech

A-Tech 16GB DDR3L 1333 ECC RDIMM 2Rx4 Server Memory

SKU CH-KYXD-6NCPX

16 GB DDR3L 1333 MHz ECC registered server DIMM with 1.35 V low-voltage operation

  • Capacity16GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR3L 1333MHz ECC RDIMM boosts server capacity
  • 35V low-voltage operation reduces power draw
  • Registered 2Rx4 design supports multi-module stability
  • CL9 latency delivers responsive data access
  • 240-pin DIMM fits compatible DDR3L server slots

What This Module Is

A-Tech 16GB DDR3L 1333 ECC RDIMM 2Rx4 Server Memory is a registered DIMM built for server and workstation platforms that require error-correcting code memory. It runs at 1333 MHz with CL9 latency and operates at 1.35V low voltage. The module uses a 240-pin form factor and carries a 2Rx4 rank configuration.

Who Should Buy This

This module suits administrators upgrading or repairing systems that specifically accept DDR3L 1333 ECC registered DIMMs with a 2Rx4 organisation. Buyers who need non-ECC unbuffered memory, a different voltage, a higher speed grade or a larger single-module capacity should look at other options.

Installation Notes

Installation follows the standard DIMM slot procedure: align the notch, press firmly until the retention clips engage, then verify detection in the system BIOS. The most common issues are mixing registered and unbuffered modules, populating slots in an unsupported sequence, or using a platform that does not support 1.35V DDR3L operation.

Kohokohdat

  • 16GB DDR3L 1333MHz ECC RDIMM boosts server capacity
  • 35V low-voltage operation reduces power draw
  • Registered 2Rx4 design supports multi-module stability
  • CL9 latency delivers responsive data access
  • 240-pin DIMM fits compatible DDR3L server slots

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Elpida
ModelEBJ17RG4EFWD-DJ-F
Capacity16GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesEBJ17RG4EFWD-DJ-F

Kysymyksiä tästä tuotteesta

What type of motherboard slot is required for this 240-pin DDR3L RDIMM?

The module uses a standard 240-pin DDR3 DIMM slot, but the motherboard must support registered ECC memory and 1.35V DDR3L operation.

Will this 1.35V DDR3L module work in a system that only supports 1.5V DDR3?

DDR3L is backward compatible with 1.5V DDR3 slots and will run at the higher voltage if the platform does not support low-voltage operation.

How can I confirm the system recognises the full 16GB capacity and ECC function after installation?

Check the BIOS memory information or OS system properties for 16GB total capacity and verify ECC is reported as active or enabled.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.