A-Tech 16GB (4x4GB) DDR4 2666MHz CL19 1.2V 288-Pin Desktop RAM Kit
- 16GB (4 x 4GB)
- 288-Pin PC RAM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
A 16 GB DDR4 SODIMM module running at 3200 MHz with CL22 latency and 1.2 V operation for laptop memory upgrades
Speed DDR4 3200 (PC4 25600)
This 16 GB DDR4 SO-DIMM module runs at 3200 MHz with CL22 latency and 1.20 V standard voltage. It uses the 260-pin form factor required by laptops, notebooks and all-in-one PCs that support DDR4 3200 memory. The non-ECC unbuffered design matches mainstream consumer platforms from major brands including Acer, ASUS, Dell, HP, Lenovo and others.
The module replaces a single lower-capacity stick or fills an empty slot to reach 16 GB of total memory. The jump is worthwhile when your system currently runs 8 GB or less and struggles with multitasking, browser tabs or large documents. Buyers who need more than 16 GB total or require ECC error correction should look elsewhere.
Installation requires a free SO-DIMM slot and a motherboard that accepts DDR4 3200 unbuffered memory at 1.2 V. The stick frees up the second slot for a future matching module if the platform supports dual-channel operation. Verify your device's maximum supported speed and total capacity before purchase.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Laptop Memory RAM |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The module uses the standard 260-pin SO-DIMM form factor for DDR4 laptop memory. It requires an available DDR4 SO-DIMM slot that supports 1.2V operation.
Align the notch on the module with the key in the slot, insert at a slight angle, then press down firmly until both side clips click audibly to secure the 260-pin connector.
No firmware updates are required for this memory. It is a solid-state component with no moving parts, designed to last the usable life of the laptop under normal operating conditions.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?