A-Tech 16GB (4x4GB) DDR4 2666MHz CL19 1.2V 288-Pin Desktop RAM Kit
- 16GB (4 x 4GB)
- 288-Pin PC RAM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
A 16 GB DDR4 SODIMM module running at 3200 MHz with CL22 latency and 1.2 V operation for laptop memory upgrades
Speed DDR4 3200 (PC4 25600)
This 16 GB DDR4 SO-DIMM module runs at 3200 MHz with CL22 latency and 1.20 V standard voltage. It uses the 260-pin form factor required by laptops, notebooks and all-in-one PCs that support DDR4 3200 memory. The non-ECC unbuffered design matches mainstream consumer platforms from major brands including Acer, ASUS, Dell, HP, Lenovo and others.
The module replaces a single lower-capacity stick or fills an empty slot to reach 16 GB of total memory. The jump is worthwhile when your system currently runs 8 GB or less and struggles with multitasking, browser tabs or large documents. Buyers who need more than 16 GB total or require ECC error correction should look elsewhere.
Installation requires a free SO-DIMM slot and a motherboard that accepts DDR4 3200 unbuffered memory at 1.2 V. The stick frees up the second slot for a future matching module if the platform supports dual-channel operation. Verify your device's maximum supported speed and total capacity before purchase.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Laptop Memory RAM |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
The module uses the standard 260-pin SO-DIMM form factor for DDR4 laptop memory. It requires an available DDR4 SO-DIMM slot that supports 1.2V operation.
Align the notch on the module with the key in the slot, insert at a slight angle, then press down firmly until both side clips click audibly to secure the 260-pin connector.
No firmware updates are required for this memory. It is a solid-state component with no moving parts, designed to last the usable life of the laptop under normal operating conditions.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?