A-Tech 16GB (4x4GB) DDR4 2666MHz CL19 1.2V 288-Pin Desktop RAM Kit
- 16GB (4 x 4GB)
- 288-Pin PC RAM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 16 GB DDR4 SODIMM module running at 3200 MHz with CL22 latency and 1.2 V operation for laptop memory upgrades
Speed DDR4 3200 (PC4 25600)
This 16 GB DDR4 SO-DIMM module runs at 3200 MHz with CL22 latency and 1.20 V standard voltage. It uses the 260-pin form factor required by laptops, notebooks and all-in-one PCs that support DDR4 3200 memory. The non-ECC unbuffered design matches mainstream consumer platforms from major brands including Acer, ASUS, Dell, HP, Lenovo and others.
The module replaces a single lower-capacity stick or fills an empty slot to reach 16 GB of total memory. The jump is worthwhile when your system currently runs 8 GB or less and struggles with multitasking, browser tabs or large documents. Buyers who need more than 16 GB total or require ECC error correction should look elsewhere.
Installation requires a free SO-DIMM slot and a motherboard that accepts DDR4 3200 unbuffered memory at 1.2 V. The stick frees up the second slot for a future matching module if the platform supports dual-channel operation. Verify your device's maximum supported speed and total capacity before purchase.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Laptop Memory RAM |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module uses the standard 260-pin SO-DIMM form factor for DDR4 laptop memory. It requires an available DDR4 SO-DIMM slot that supports 1.2V operation.
Align the notch on the module with the key in the slot, insert at a slight angle, then press down firmly until both side clips click audibly to secure the 260-pin connector.
No firmware updates are required for this memory. It is a solid-state component with no moving parts, designed to last the usable life of the laptop under normal operating conditions.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟