A-Tech 16GB (2x8GB) DDR4 2666MHz CL19 1.2V 288-Pin UDIMM Kit
- 16GB (2 x 8GB)
- DDR4 2666 (PC4 2130…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 16 GB DDR4 3200 MHz UDIMM module with CL22 latency and 1.2 V operation for desktop memory upgrades
Speed DDR4 3200 (PC4 25600)
This 16GB DDR4 module runs at 3200MHz with a tested frequency of 3200 and standard 1.2V operation. It uses a 288-pin UDIMM form factor and carries CL22 latency timings. The kit is built for desktop computers and targets users who want a straightforward memory upgrade to improve multitasking and system responsiveness.
Buyers with systems that require ECC, registered memory, or a different DDR generation should look elsewhere. The module is validated for a wide range of desktop brands, but the manufacturer advises verifying your system's supported memory specifications before purchase to confirm compatibility.
Align the notch with the slot key and press firmly until the retention clips click into place. A common issue is the module not seating fully, which can prevent the system from posting; re-seating usually resolves this. Ensure the platform supports DDR4 3200MHz non-ECC unbuffered memory to avoid compatibility problems.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
This is a standard 288-pin DDR4 UDIMM running at 1.2V with a tested frequency of 3200MHz. It fits any desktop board that accepts DDR4 DIMMs at that speed and voltage.
CL22 is the standard latency for JEDEC 3200MHz DDR4. You will see normal desktop responsiveness; tighter timings only matter in specialised benchmarks or extreme overclocking.
Yes, provided your motherboard has a free DIMM slot and supports the total capacity. The system will run both modules at the lowest common speed and latency.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟