A-Tech 16GB (2x8GB) DDR4 2666MHz CL19 1.2V 288-Pin UDIMM Kit
- 16GB (2 x 8GB)
- DDR4 2666 (PC4 2130…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
A 16 GB DDR4 3200 MHz UDIMM module with CL22 latency and 1.2 V operation for desktop memory upgrades
Speed DDR4 3200 (PC4 25600)
This 16GB DDR4 module runs at 3200MHz with a tested frequency of 3200 and standard 1.2V operation. It uses a 288-pin UDIMM form factor and carries CL22 latency timings. The kit is built for desktop computers and targets users who want a straightforward memory upgrade to improve multitasking and system responsiveness.
Buyers with systems that require ECC, registered memory, or a different DDR generation should look elsewhere. The module is validated for a wide range of desktop brands, but the manufacturer advises verifying your system's supported memory specifications before purchase to confirm compatibility.
Align the notch with the slot key and press firmly until the retention clips click into place. A common issue is the module not seating fully, which can prevent the system from posting; re-seating usually resolves this. Ensure the platform supports DDR4 3200MHz non-ECC unbuffered memory to avoid compatibility problems.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
This is a standard 288-pin DDR4 UDIMM running at 1.2V with a tested frequency of 3200MHz. It fits any desktop board that accepts DDR4 DIMMs at that speed and voltage.
CL22 is the standard latency for JEDEC 3200MHz DDR4. You will see normal desktop responsiveness; tighter timings only matter in specialised benchmarks or extreme overclocking.
Yes, provided your motherboard has a free DIMM slot and supports the total capacity. The system will run both modules at the lowest common speed and latency.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม