A-Tech 8GB DDR4 2666MHz UDIMM Non-ECC Unbuffered 1.2V CL19 288-Pin Desktop RAM
- 8GB
- DDR4 2666 (PC4 2130…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
An 8 GB DDR4 desktop memory module running at 3200 MHz with CL22 latency and standard 1.2 V operation
Speed DDR4 3200 (PC4 25600)
This A-Tech module delivers 8GB of DDR4 memory rated at 3200MHz with a CL22 latency and 1.20V operating voltage. It uses the standard 288-pin UDIMM form factor and is non-ECC unbuffered. The specification targets desktop PCs needing a straightforward capacity increase.
The kit contains one 8GB stick, so installation occupies a single DIMM slot and leaves remaining slots free for future expansion. No extra cables, software or configuration tools are bundled; the module relies on standard JEDEC timings at 1.2V for plug-and-play operation. Verified compatibility lists cover a wide range of major desktop brands.
Ideal for users adding memory to a DDR4-based office, home or light-workstation system where 8GB fills a gap or starts a dual-channel pair. Builders requiring ECC, registered modules, lower latency bins or higher frequencies should select a different part. Always confirm the motherboard's qualified-vendor list before ordering.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
CL22 is a fixed timing on this module; it does not change with age and the stick itself has no serviceable parts, so no maintenance or replacement for latency is required.
The 1.2 V operating voltage and CL22 timing are the primary constraints; the JEDEC-standard 1.20 V ceiling caps frequency scaling before thermal throttling becomes an issue.
At 1.2 V the module runs cool and completely silent — no fan, no moving parts — so heat output is minimal and there is zero audible noise.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม