A-Tech 16GB (4x4GB) DDR4 2133MHz PC4-17000 UDIMM CL15 288-Pin Desktop RAM Kit
- 16GB (4 x 4GB)
- 288-Pin PC RAM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 16 GB quad-channel DDR4 kit running at 3200 MHz with 1.2 V CL22 timing for desktop upgrades
Capacity 16GB (4 x 4GB)
Speed DDR4 3200 (PC4 25600)
This kit provides 16 GB of DDR4 desktop memory arranged as four 4 GB modules. It is intended for users who want to fill four DIMM slots on a compatible motherboard in a single purchase.
The modules replace any existing DDR4 DIMMs running at lower speeds or smaller capacities. The jump is worthwhile when your current memory limits multitasking or when applications report insufficient RAM for smooth operation.
Verify that your motherboard supports DDR4 3200 MT/s UDIMM memory at 1.2 V with a CAS latency of 22. Confirm the board has four free 288-pin slots and that the CPU or chipset can address the full 16 GB in quad-channel mode.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Model | A-Tech 16GB Kit (4x4GB) DDR4-3200 Desktop RAM |
| Capacity | 16GB (4 x 4GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The kit is built to the standard DDR4 288‑pin UDIMM form factor and runs at 1.20 V, so any desktop board that supports DDR4 3200 MHz non‑ECC memory can use it.
Most modern platforms will select the 3200 MHz speed automatically; if the board defaults to a lower frequency, enable the XMP or DOCP profile in the BIOS to run at the rated 3200 MHz.
Mixing is possible only if the other sticks are also DDR4 non‑ECC unbuffered DIMMs at 1.20 V; matching speed and CL22 timings will give the best stability.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟