A-Tech 16GB (4x4GB) DDR4 2133MHz PC4-17000 UDIMM CL15 288-Pin Desktop RAM Kit
- 16GB (4 x 4GB)
- 288-Pin PC RAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 16 GB quad-channel DDR4 kit running at 3200 MHz with 1.2 V CL22 timing for desktop upgrades
Capacity 16GB (4 x 4GB)
Speed DDR4 3200 (PC4 25600)
This kit provides 16 GB of DDR4 desktop memory arranged as four 4 GB modules. It is intended for users who want to fill four DIMM slots on a compatible motherboard in a single purchase.
The modules replace any existing DDR4 DIMMs running at lower speeds or smaller capacities. The jump is worthwhile when your current memory limits multitasking or when applications report insufficient RAM for smooth operation.
Verify that your motherboard supports DDR4 3200 MT/s UDIMM memory at 1.2 V with a CAS latency of 22. Confirm the board has four free 288-pin slots and that the CPU or chipset can address the full 16 GB in quad-channel mode.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Model | A-Tech 16GB Kit (4x4GB) DDR4-3200 Desktop RAM |
| Capacity | 16GB (4 x 4GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit is built to the standard DDR4 288‑pin UDIMM form factor and runs at 1.20 V, so any desktop board that supports DDR4 3200 MHz non‑ECC memory can use it.
Most modern platforms will select the 3200 MHz speed automatically; if the board defaults to a lower frequency, enable the XMP or DOCP profile in the BIOS to run at the rated 3200 MHz.
Mixing is possible only if the other sticks are also DDR4 non‑ECC unbuffered DIMMs at 1.20 V; matching speed and CL22 timings will give the best stability.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?