A-Tech 16GB (4x4GB) DDR4 2133MHz PC4-17000 UDIMM CL15 288-Pin Desktop RAM Kit
- 16GB (4 x 4GB)
- 288-Pin PC RAM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
A 16 GB quad-channel DDR4 kit running at 3200 MHz with 1.2 V CL22 timing for desktop upgrades
Capacity 16GB (4 x 4GB)
Speed DDR4 3200 (PC4 25600)
This kit provides 16 GB of DDR4 desktop memory arranged as four 4 GB modules. It is intended for users who want to fill four DIMM slots on a compatible motherboard in a single purchase.
The modules replace any existing DDR4 DIMMs running at lower speeds or smaller capacities. The jump is worthwhile when your current memory limits multitasking or when applications report insufficient RAM for smooth operation.
Verify that your motherboard supports DDR4 3200 MT/s UDIMM memory at 1.2 V with a CAS latency of 22. Confirm the board has four free 288-pin slots and that the CPU or chipset can address the full 16 GB in quad-channel mode.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Model | A-Tech 16GB Kit (4x4GB) DDR4-3200 Desktop RAM |
| Capacity | 16GB (4 x 4GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The kit is built to the standard DDR4 288‑pin UDIMM form factor and runs at 1.20 V, so any desktop board that supports DDR4 3200 MHz non‑ECC memory can use it.
Most modern platforms will select the 3200 MHz speed automatically; if the board defaults to a lower frequency, enable the XMP or DOCP profile in the BIOS to run at the rated 3200 MHz.
Mixing is possible only if the other sticks are also DDR4 non‑ECC unbuffered DIMMs at 1.20 V; matching speed and CL22 timings will give the best stability.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?